Recent content by Godders

Hi Andy 26v 9ah

Thanks I will check this out and get pic's

Hi All Have the wife's bike lost power have checked battery output is good 29v. Taen it apart to check for loose connections or dirt related issue any ideas from these picks to diagnose please would be great.

Many thanks I think its my only option, as the info I have on this bike when I purchased was not good. Thanks Andy

This is a old problem what I've had kindly been advised on but what ever wire combo I try can't get the pas sensor to kick in Ive got red 2.89v and 2.75v on green and 0v on black from controller end ive tried moving all the wire combo on pas as see in pic as suggested I have also try to find...

Thanks very much for your quick feedback

Will do many thanks very helpful

On the controller I can check 5v Gnd and sig, how is this done on sensor end is there a colour code at the sensor I would expect red 5v blue Gnd yellow sig Is this correct? Also the sensor has a arrow does this have to follow the pedal travel?

Will give that a go, many thanks

Hi anybody can advise I had a worn sensor so I got another 5 magnet sensor kit but the wires were different from the old one looking closer at the old mag disc it's use v5 v6 v7 is where its going wrong? Regards