Recent content by Grafix01

Fair point!

I have a 130X thumb throttle which although sharing 3-pin connector geometry (sealed/moulded Julet connectors) doesn't work at all when I substitute it for the existing 158X twist grip type throttle on the bike. I'm guessing this is because the wiring/pins are differently ordered. Without having...

Update. Just wanted to say thanks for all the help and advice given to me on this thread. I replaced my locked KT5 lcd with an unlocked one and copied every parameter (for now) across - except maximum assist speed. It worked perfectly and the bike surges up to the new maximum without any drop...

Yep - understood - it is set as P3 = 1 and looking at the LCD5 user manual I'd realised the difference between that and setting P3 to 0 where it would change to speed threshold related cut-off in each level. Do you happen to know what those speed thresholds are in levels 1 to 5?

Really interesting - thank you - I had wondered at the various PAS levels versus current and this explains it really well.

Definitely agree! It's pretty spinny at 17/18 going downhill so that would need some thought as you say.

Perfect - all understood - many thanks!

Could I ask. Would the XF08 hub motor cope OK with some higher current? I'm seeing there is a KT 6-mosfet controller the same size as mine but with rated 10A output and 20amp max - versus my controller's 7A/15A spec.

Deal!

Fantastic info - thanks for putting it so clearly. I understand your point about the speed too by the way - it's 'happy' at 15.5mph but you can sense the motor has more to give - as it cuts 'thrust' quite obviously when it hits that speed on the flat. I don't want to make the bike feel...

Having had a squint at the controller now its a KT model with rated current of 7A and max current of 15A. To follow up on my query and the info received does this basically mean the motor is limited to continuous 250W by the combination of 14ah 36V battery and this controller since 7A*36V =...

Much appreciated - thank you!

I'm happy with my new E-go MAX bike but note that its LCD (a Kunteng LCD 5) is locked and so no tweaking of any parameters is possible. I get that but I'm an engineer and born to tweak! If I was to buy a std LCD 5 and swap it in would I actually have any real room for modification of the...