Recent content by halfpenny

That link is for a gen3 kit, quite different - and quite expensive for an adapter lead and cable tie

Thanks Peter. I hadn't found that. I'm going to proceed, and will post again in due course.

Thank you Peter. I have seen references to using another battery with the Swytch motor and controller, but there is no detail. If you can point me to a relevant post I would be most grateful. I cannot see that it is a faff, because the battery has only positive and negative outputs, and I am...

Unfortunately Peter, this does not address my needs since I shall keep my existing motor controller. I am looking at a 13Ah, Yose frame mounted battery. I should add that I am in the UK

Thank you Peter. I use my Swytch kit for 25-30 miles at a time on the lowest setting, which is sufficient since I mostly use pedal power - for exercise purposes. A simple upgrade will do.

Saneagle, thanks for the reply. As I said, the Swytch kit has suited me, both in range and assistance. I will be converting to a frame mounted battery. Would you kindly make an ebay suggestion for a 10-15Ah conversion. That size will be more than sufficient given that the Swytch battery is only...

Saneagle, I have Swytch gen 2, which has been satisfactory over 3000+miles, but the battery is now tired.

Thank you Benjahmin. I doubt I shall push the motor any harder since I use mostly pedal power.

I want to increase range by upgrading my battery to one of a larger capacity using the same motor controller and hub motor. If, for example I upgrade from 10Ah to 15Ah battery (same voltage), will that impact my existing controller. I would have thought no - a bit like putting a truck battery on...