Recent content by handbaked

  1. H

    eMTB owners photo and ride thread.

    Sturmey archer 3spd IGH Sent from my Nexus 5X using Tapatalk
  2. H

    eMTB owners photo and ride thread.

    Here is my latest build. BBSHD with 14S7P battery. Sent from my Nexus 5X using Tapatalk
  3. H

    Assbrakes?

    I used to do this on my bmx. Many bmx riders don't have any brakes as it's a way to increase your flow when dirt jumping, park and street riding. Stops you from bottling it on the approach to a trick also. Not exactly ideal for a to b travelling though :-) Sent from my Nexus 5X using Tapatalk
  4. H

    troubleshooting an ongoing problem with my lishui / xiongda set up

    Hi I still have a dead e-bike (after several months now). Partly due to no time, work and my first child(!) and secondly because it is my first e-bike set up and I'm still trying to work it all out! To re-iterate I have a Xiongda 2 speed motor, a Lishui 48v controller and C600 LCD. It was all...
  5. H

    Xiongda 2 speed motor has died

    Unfortunately i don't have a hot air gun. I am going to make a tool to try and open it. How many km's have you done on your xiongda? And have you had problems?
  6. H

    M128 500W rear motor

    I would be putting it in a 26" rim. Do you have one of those motors you have linked? The 48v 500w model sounds interesting. Any idea how that would compare to the xiongda?
  7. H

    M128 500W rear motor

    Hi Has anyone got any experience of these motors: http://www.elifebike.com/peng/iview.asp?KeyID=dtpic-2011-1G-KSU5.3DNYT Seems like what i might be after. I currently have xiongda 350W 2 speed rear hub, Any idea how this would compare on my London commute? Cheers
  8. H

    Xiongda 2 speed motor has died

    Right, OK, I see. Didn't realise it would be quite that difficult. Every hurdle to this bike is a massive one!
  9. H

    Xiongda 2 speed motor has died

    I done what you said but no luck turning it. I managed to slightly bend the screw that came with it trying to lever with the spanner. I then put in a different much longer bolt and just totally bent that too. Hmmm....this is pretty tight!
  10. H

    Xiongda 2 speed motor has died

    I linked that endless sphere post but my question is do i remove all 3 screws and then put in any length bolt with a hex head on top or do i need to worry about the length of the bolt i put in?
  11. H

    Xiongda 2 speed motor has died

    What is the best way to open the motor?
  12. H

    Cobox bluetooth Battery meter

    Hi Anyone used this before? http://www.cobox-ebikes.com/290/wireless-bluetooth-cobox-watt-meter-36v-48v.html Looks very interesting indeed. Anything else like this on the market that i may not have come across? Cheers
  13. H

    Ebay seller ' Electric Bike Conversions ' seem to be doing well :)

    So can anyone tell me what the weight is of just the motor (Or motor and rim)? It is a shame its not 48v as thats what my current set up is and im looking for a higher power motor than i can just swap out on my ebike frame.
  14. H

    Xiongda 2 speed motor has died

    Hi I bought a xiongda motor a few months back and after 750km it has stopped working. I am trying to determin why with Bonnie at Alibaba but currently getting pretty poor explanations from her as to how to open the motor as this is the next thing she has asked me to do. So far we seem to have...
  15. H

    Deep cycle NOT ebike battery question

    Hi I have an old 12v 120ah deep cycle battery that has not been used in ages (over a year). Is it likely dead if currently at low voltage? Cheers.