harrys's latest activity
-
harrys replied to the thread Modifying to Torque Sensing.JohnD135, the S-KU65 is a 15A controller coupled with an analog 810LED that calls up 3 PAS levels. Two issues. First. it's overheating... -
OK, measured it as 598 +5 = 603 against Ryans way of 602. Near enuf methinks.
-
harrys replied to the thread Modifying to Torque Sensing.I hope that was a typing mistake and you mean 9 pins with three large ones, but a bike motor from 2002 is also pretty old. There are...
-
-
harrys replied to the thread Help! My next project."Having removed the spokes I've used the Ryan method of finding the ERD. " I like that method. I have some straight spokes that I...
-
harrys replied to the thread General concensus on TSDZ, ToSeven, and any similar competitors.Most geared hubs freewheel, so your bike will coast as well as its tires and your riding position allows. There's a slight drag when...
-
harrys replied to the thread General concensus on TSDZ, ToSeven, and any similar competitors.US vendor electrifybike did stop selling TSDZ2B/OSF but I believe half their problems were users beating too hard on the motors...
-
harrys replied to the thread General concensus on TSDZ, ToSeven, and any similar competitors.If your follow my posting history, I originally thought the TSDZ2 was a POS, compared to my hubmotors. Part of that was not being used...
-
harrys replied to the thread General concensus on TSDZ, ToSeven, and any similar competitors.I did not mention the make-buy decision. If you sit around for a year or so, and follow ebike discussions, deals and clearance sales pop...
-
harrys replied to the thread General concensus on TSDZ, ToSeven, and any similar competitors.I'm not aware of many torque sense DIY hub motor kits, unless you want to buy some add-ons from Grin in Vancouver, CA. They seem kind of...
-
-
harrys replied to the thread Mouting mid-drive moter - how to get around brake/gear cables.I would remove the cover, if I thought that would work. Heat the sticker gently with a hair dryer, and it should peel off in one piece...
-
-
harrys replied to the thread LcD Display.I like the LCD3. It's not real expensive, and is easy to read. It is the only one that gives you the temperature inside the case. Easy...
