Recent content by Hightechpete

  1. Hightechpete

    Wanted Cyclotricity rack battery mount

    Thanks, it seems that several suppliers use the same mounting, one on order from Ebay.
  2. Hightechpete

    Wanted Cyclotricity rack battery mount

    I found one on Ebay, the X-go rack baterry looks like a perfect match and the mounting is available separately.
  3. Hightechpete

    Wanted Cyclotricity rack battery mount

    Awaiting reply from Cyclotricity, in the meantime it was worth asking if someone had one laying around. Plenty of hailong mounts available on line but can't find any rack mounted. I realise Cyclotricity dont make the batteries but it seemed like the safest option. The fitting rail is 65mm wide.
  4. Hightechpete

    Wanted Cyclotricity rack battery mount

    Looking for a mounting for a cyclotricity 36v rear rack battery, I only need the mounting and controller box not the battery.
  5. Hightechpete

    48v upgrade

    Update:- A new controller and LCD4 have been installed, a square wave 20A 36/48v controller (pictured below) was found on Ebay (https://www.ebay.co.uk/usr/lightinbike18) it was listed as 36v but turned out to be 36/48v, a bit of a squeeze but just fits inside the battery box, result! It gives...
  6. Hightechpete

    48v upgrade

    Thanks for the link, can't find one that will work sensorless, the 22a are dual mode but physically too big.
  7. Hightechpete

    48v upgrade

    I'll give it go, this might be the last bike I ever buy so I want to get it right.
  8. Hightechpete

    48v upgrade

    Thanks saneagle, it seems that all their square wave controllers will run sensorless but all the 36/48v are 22a and too big to fit, so if I want to keep things neat it looks as though I'll have to settle for a 24/36v, it's a shame because I wanted the option of upgrading to 48v. The KT website...
  9. Hightechpete

    48v upgrade

    Further to the above, the KT controller and LCD4 was obtained and fitted, I'm getting an error code 3 (Hall sensor error). I wrongly assumed that the square wave controller would run in unsensored mode, not so. There are cheap dual mode controllers available on ebay but I would like to stick...
  10. Hightechpete

    Hello all! New joiner here.

    Welcome Dave, love the neatness of the bike especially the hidden cables, I've not seen that model before. I see you like painting.
  11. Hightechpete

    48v upgrade

    Photos of mudguard and gear cluster Mudguards look similar to those fitted to the Big bear, the last time I looked at CH White's website there was a bare frame for sale for like 80 quid. Don't worry about all the questions, after all the good advice from members I'm happy to give something back
  12. Hightechpete

    48v upgrade

    What?, you cannot be serious, £189 !!. That's almost what I paid for the bike. Interesting comment re. Big apples, maybe that's why it rides so good.
  13. Hightechpete

    48v upgrade

    It's the Dahon espresso virtually as new, 26 inch wheels, 8fun front wheel motor labelled 250 watt, unknown controller (label missing), big apple tyres. Got the original receipt for £973 , rides nicely. It's a keeper.
  14. Hightechpete

    48v upgrade

    Thanks for all the advice, seems like those 21700 cell 15ah batteries are in short supply at the moment. I'll report back when it's all done.
  15. Hightechpete

    48v upgrade

    Thanks for the explanation, I'm recovering from a broken leg and using the bike to aid recovery, even so I'm finding the hill climbing power adequate so staying with 36v seems sensible. There are 36v 15 Ah batteries available made from 21700 panasonic cells which I assume would have a good...