Recent content by it is i footpump

  1. I

    For Sale Anyone got OSF on their TSDZ2?

    I bought thecable from the USA a while back' but could not download the relevant file to programme my tdz. I wanted to change from 250w to 500,e
  2. I

    Changed 350 back to 250 yosepower

    Hi all have kudos ebike 26” mtb fitted with 36v 350w rear moter, kt lcd 4 ,kt 17amp controller. My previous 250 moter failed so purchased 350 yose, found using thumb throttle 15mph old setup. 18 mph with 350w moter as it revs higher. Found using level 5 assist the controller would get very...
  3. I

    Ebike battery suppliers in the uk

    Thanks all Eclipse was the company i was trying to remember, they were out of stock of most batteries when i looked about 18 months ago Will have a look at motosavers, not heard of them
  4. I

    Ebike battery suppliers in the uk

    Hi all i am aware of lnnersat/ebikebatteries.co.uk, But there was another company that sold batteries and kits(not woosh). That used branded cells ,but i cannot recall the name of the company but was in the uk. can anyone give info on this Thank you
  5. I

    Battery upgrade advice sought

    Hi ihave tdz2 fitted to halfords carrera and use 10ah yospower bottle battery, i also have 17ah yospower dolphin, and enerprof 13.8ah battery pack samsung cells I at70+. Use turbo most of the time if i do a longer ,hilly journey, i use 10ah bottle battery and enerprof in rear saddle bag. Had no...
  6. I

    Just tried my new 48v. Q13ah battery with yosepower 350w hub moter

    This is indeed strange checked lcd3 settings p and c. As far as i can see no differance between lcd3 and lcd4. Still no pas. In rumaging through settings i changed the speed. from 25 to 30kph. And left the bike. later i tried throttle and was holding handle bar bike shot forward as you would...
  7. I

    Just tried my new 48v. Q13ah battery with yosepower 350w hub moter

    Thanks for the tip will have a look at lcd3 manual and actual settings in lvcd3
  8. I

    Just tried my new 48v. Q13ah battery with yosepower 350w hub moter

    Hi all a bit baffled have tried the above with my kt lcd3 and pas and throttle work ok , However soon as i. Change to kt lcd4 i have throttle and no pas, swap back to lcd3 all is ok? cannot see anything obvious in kt lcd4 manual re pas thats amiss any ideas thank you
  9. I

    Just tried my new 48v. Q13ah battery with yosepower 350w hub moter

    Nealh pas 1-5 was working with 48v battery and lcd3 today, i simply have changed the lcd3 display to lcd4 as its smaller and the lcd3 mounting bracket had broken, but found i had no pas regardless of trying 1-5 on lcd4, Did not have any cut outs etc just reduced the pas to 3 coming home only...
  10. I

    Just tried my new 48v. Q13ah battery with yosepower 350w hub moter

    Thanks nealh. I tried the 36v and 48v battries with 17amp controller and lcd3 display, to see what wattage was being used, posted the thread, and then fitted the lcd4 set wheel size/ speed /. And tried out lcd4. but i have throttle but no pas whatsoever, had to return home ,not sure what the...
  11. I

    Just tried my new 48v. Q13ah battery with yosepower 350w hub moter

    Hi all just tried my 48v battery with yosepower 350 hub , controller changed to kt 17amp vertion from 15amp one, Display changed to kt lcd4. tried with 15 amp 36v,17amp 36v. And 48v battery. Approx figures as displayed on lcd3. There was a big jump power level 5. 48v. Re 36v. Controller...
  12. I

    Which torque arm for rear 350w yosepower ebay if possible

    i ordered the ss one from the link above posted by nealh. Thank you
  13. I

    Which torque arm for rear 350w yosepower ebay if possible

    Thank you torque arm ordered. Can someone post a pic of fitted torque arm for my referance.