Recent content by izy

take it round the ulster grand prix i'll race ya xD also just noticed thats a little weight for its size like 21kg

Sure let me just buy a "250w continuous power" sticker and show them my display limiting my speed to 15.5mph (not including the slight overhead you are allowed before motor realises it needs to cutoff) Because the cycle analyst is very versatile and has an array of settings to dial in and I can...

None because its a conversion kit they not embossed with power ratings besides the rating on motors conforms to what the controller supplies. Which is exactly why the 1500w mac motor is being marked as legal as well as conversion kits because they usually come with a 250w limiter. A power...

You need to read the whole thread "(h) pedal cycles with pedal assistance which are equipped with an auxiliary electric motor having a maximum continuous rated power of less than or equal to 250 W, where the output of the motor is cut off when the cyclist stops pedalling and is otherwise...

Nah I understand perfectly fine how legal it is depending on what I do with it. The literal legality law states that a motor can only do 250w continuous and 15.5mph There no limit how much peak power is allowed Bosch mid drives literally break 800w in performance mode. It's the same reason...

hmmm so my rated 1500w DD hub is best legal conversion kit according to you then since it can be configured to do 250 constant and high peaks like this plus even with import costs direct from grins website its cheaper than what this website sells the CA/PR for that and i get my warranty...

https://www.amazon.co.uk/gp/product/B004XVQBIM/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 this one also works well for larger axles like 14mm your meant to use it against the frame and pedal force but using grips on it works though abit awkward

aliexpress usually sell the battery casings with mounts seperate, usually just match the kit and choose the correct pins

The price was £20 but I was also using 80% infill less infill will obviously lower the price

i did something more practical i got a absorber 3d printed using tpu (rubber) to sit my battery against. got the stl files from thingiverse (search hailong , shark battery) then requested it beingprinted on treatstock i used 80% infill but honestly 60%-70% would be better

i mean by switched back he means limited. which you can program from the lcd/controller on the go since the menu allows that

also you should really have 2 torque arms for that kind of power

Good shout out those look nice. For now until I rewire the lot 100amp bull let will do

it was the stock 30a one inbuilt into the controller and hub from looks of it. Bullets works from 20amp all the way to 200amp depending on size and I bought a big mix of sizes

i dont know lmao i just have it tightened extra on gear side sometimes it loosens again if i dont tighten it enough to affect the freewheeling on the DD hub i have it tight enough that the rear wheel barely gets a rotation i can have it looser but with a 1500w motor I want the extra security...