Recent content by jamesdaintee

this is the connector for motor and ehat it used to plug into (in hand)

i have made sure to select the 15a contoller or is thid not what you meant

i was considering these as they are pretty cheap would they work

this is its motor

has anyone before changed their battery and controller on a gtech bike

so dont solder a bridge as another person said

i have found a soldering iron and will get help from my dad as he knows more about electrics however after taking apart the bike connector we are wondering if instead of soldering a bridge across could this be done internally by connecting the wires i have sent a picture of for example red and...

to be honest im not clued up enough on stuff like this and dont have a soldering iron so i think my best bet is just to remove everything but rear motor and try get a new battery and controller

i took the bottom off unscrewed the screws onthe circuit board however it feels there is something still holding the circuit board in as it wont pull away

thats what i thought

anyone recommend a battery and controller that's compatible with a gtech bike

this is the bottom of the battery that connects to the bike i have gave a clean using a small brush and still no connection i have also filled down the on bike connectors

i have cleaned the prongs and the inside of battery however it is still not connecting

okay thankyou so it is the battery that is the issue is there anyway to replace the broken part of the battery as the run time is still good when it does connect because id rather not buy a new battery if its avoidable

does anyone know where i can find a connecter replacement