Jodel's latest activity
-
JJodel replied to the thread Newby to the excellent Forum.Saneagle - I normally agree with most observations / advice you give, but I have tried a KT controller on my solo (it is still fitted)...
-
JJodel replied to the thread Newby to the excellent Forum.As a team, we are a bit younger than you and are still (just) in our 60’s. Like many others, we reached the point where a bit of extra...
-
JFwiw i spent a good while 'researching' ebikes before my plunge. Prior to landing in here almost everything i had read had given me the...
-
JI disagree. As a 75 year old I find it very dangerous setting off from traffic lights wobbling all over the road until I get a...
-
JJodel replied to the thread Lishui Controller Modification - Firmware Flash Project.I have no wish / intention to offend or irritate any forum member, but will add my own (limited) observations to the Lishui / KT debate...
-
JIt depends which version you use and which motor you have. I tried N360 on a GNG crank motor, which ran at 36v and 22A. Under hight...
-
JJodel replied to the thread Enviolo [Nuvinci] gear hubs..I've recently acquired a Rohloff Speedhub and we have this fitted to a tandem with a Tongshen TSDZ2B motor, so quite a heavy duty...
-
JJodel reacted to Sparksandbangs's post in the thread Lishui Controller Modification - Firmware Flash Project with
Like.
I've done some interesting modifications this weekend to test through out the week. It is getting nearer to being licked. Gone back to... -
JJodel reacted to Sparksandbangs's post in the thread Lishui Controller Modification - Firmware Flash Project with Like.
I've dumped the cadence based power levels. Latest work is incorporating a speed based soft start. Currently runs from 0 to 9kmph...
-
JJodel reacted to Sparksandbangs's post in the thread Lishui Controller Modification - Firmware Flash Project with Like.
Assuming I've got the maths right. Previous setting of Ramp end was 1000, 12 pulses per rotation, so a cadence of 40rpm before full...
-
JJodel reacted to Sparksandbangs's post in the thread Lishui Controller Modification - Firmware Flash Project with Like.
Looking at my coding last night for the assist it suddenly becomes clear what I've done. In the original code for using an LCD3 it just...
-
JJodel replied to the thread Brake cable Vs gear cable.There are several differences I believe. Gear shift inner cables are usually either 1.1mm or 1.2mm thickness. The nipple at the end...
-
JJodel reacted to Sparksandbangs's post in the thread Lishui Controller Modification - Firmware Flash Project with Informative.
Followed the instructions from the Wiki. Connected ST-Link V2. Opened the Java tool. Set up the battery levels, switched off torque...
-
JJodel reacted to Sparksandbangs's post in the thread Lishui Controller Modification - Firmware Flash Project with Like.
I’ve had the urge to tinker with firmware for ages and have decided to take the plunge. As I want to use the bike while I'm...
-
JJodel replied to the thread Tongshen TSDZ2B and a Thorn Explorer Tandem.Like you, I wasn't sure if riding solo would trigger the torque sensor at all, but it seems to work perfectly well. I checked the...