Recent content by Lance01

Im happy to give that a go but Im not sure if it will work as mines not a bottom bracket motor but rear wheel motor

My hmi is very basic. Is there specific software needed to reprogram or will it come with a cable? I've looked briefly is it usb to higo type cable? Do you have an example an link that may work? Thanks for your help

Hi, yes it does! The basic HMI uses this exact cable which then goes into the controller. What can I do now you know this info?

Thanks for the advice, I will move it. Cheers

Hi, I have a HMI namely, DP E06.U 9.2. This is similar to DP E06.UART on Bafang's website. https://www.bafang-e.com/en/components/component/hmi/dp-e06uart.html I have a BFSWX02 36V250W (13) 27.5-1703210553-6 rear hub motor with disc brake. I have a Bafang Controller for a brushless motor...

Hi all, I have a HMI namely, DP E06.U 9.2. This is similar to DP E06.UART on Bafang's website. https://www.bafang-e.com/en/components/component/hmi/dp-e06uart.html I have a BFSWX02 36V250W (13) 27.5-1703210553-6 rear hub motor with disc brake. I have a Bafang Controller for a brushless motor...