manman94's latest activity
-
Mmanman94 replied to the thread Bafang Rear Hub Motor Questions.Thanks for all the advice guys ,I have now fitted a 17a 36v48v KT CONTROLLER it's great at pedal assist 4 and 5 but heavy on 123. I do...
-
Mmanman94 replied to the thread Bafang Rear Hub Motor Questions.To confusing for me I'm afraid but thanks I just thought it was a simple question of what maximum power controller I could use or should...
-
Mmanman94 replied to the thread Bafang Rear Hub Motor Questions.20 inch
-
Mmanman94 replied to the thread Bafang Rear Hub Motor Questions.My batteries are 36v 21ah and 48v 21ah if that helps
-
Mmanman94 replied to the thread Bafang Rear Hub Motor Questions.Yes thanks but I'm still waiting for the answer what is the maximum power controller I can use with my 250w 36v motor rear geared hub I...
-
Mmanman94 replied to the thread Bafang Rear Hub Motor Questions.That's my question what would be the maximum power controller I could use with this motor without getting into any problems,at the...
-
Mmanman94 replied to the thread Bafang Rear Hub Motor Questions.Aha well it's a bafang motor and I'm 74 kg and I use to travel to work and so on and I live in the Netherlands which is mostly flat terrain.
-
Mmanman94 replied to the thread Bafang Rear Hub Motor Questions.What would be the most powerful controller I could use with 48v 250w motor without having problems but would give me better torque or...
-
Mmanman94 replied to the thread Bafang Rear Hub Motor Questions.Yes I get 720W when in pedal assist 5 that's correct
-
Mmanman94 replied to the thread Bafang Rear Hub Motor Questions.I use two different types 36v 21ah and 48v 21ah that's the beauty of a dual controller.
-
Mmanman94 replied to the thread Bafang Rear Hub Motor Questions.I Have the Bafang 250-watt motor rear hub with KT controller 36v/48v 20Amp and it works much better than the stock Luishi controller...
-
Mmanman94 replied to the thread Kt controller problem..Thanks guys it's working finally found the problem after hours of changing cable connectors,I think 1 or 2 of the Halls wires was not...
-
Mmanman94 replied to the thread Kt controller problem..Ok I'll try that then thank you and when you say 1 I'm guessing in P2 .
-
Mmanman94 replied to the thread Kt controller problem..I know it's not the motor because I changed out the KT. Controller and put the stock controller back which is a luishi controller and...
