matthewslack's latest activity
-
Mmatthewslack reacted to Woosh's post in the thread Tongsheng TSDZ2B 48V 250W on Sale at Woosh with
Like.
Just stock level. We are phasing out TSDZ2B in favour of the TSDZ8. We still keep spare parts for servicing. -
Mmatthewslack replied to the thread Tongsheng TSDZ2B 48V 250W on Sale at Woosh.Hi Woosh, What's the background to this? Is there a change coming, or just stock levels?
-
Mmatthewslack replied to the thread Which pliers?.Out of 10,000+ hits... Your local Screwfix or Toolstation etc will sort you out for about a fiver if you take a picture of the circlip...
-
MThe fundamental flaw with the whole e-assisted bicycle concept. Yes, 8 gears is enough for the motor to assist, in fact far too many to...
-
MWhen I clicked on that ebay link it gave me "similar items from ebay shops" - I guess it was trying to be helpful :)
-
Mmatthewslack replied to the thread Ebike News.The target market is premium mid-drive bikes, including top end MTB. I suspect it will be torque sensor because I think it is trying to...
-
Mmatthewslack replied to the thread Ebike News.4.5kg is a bit heavier than most mid-drive motors, even allowing for derailleur weight. But huge issue is trying to cover 480% gear...
-
Mmatthewslack replied to the thread Recommendations for a 'Legal' 250W Rear Hub/26 Wheel for use with KT Controller.Bear in mind a 52V battery is also illegal.
-
Mmatthewslack replied to the thread Macfrey kits on aliexpress.Same issue: your links do not display in the UK, at least not today, not on my device. If you are not in the UK, you won't be able to...
-
Mmatthewslack replied to the thread Converting a dead Vanmoof X3.The extra pins are probably some Vanmoof special, but the motor itself should work with the normal 9 pins connected to a normal KT...
-
Mmatthewslack replied to the thread First post so be gentle.Two missing spokes in a front wheel is not structurally the end of the world, but I would caution against trying to true without all...
-
Mmatthewslack replied to the thread Converting a dead Vanmoof X3.KT stuff gets good reviews here, best for flexibility of configuration although a little more expensive. Just search and read previous...
-
Mmatthewslack replied to the thread First post so be gentle.I broke some spokes out on a long trip far from home, lucky to find a good bike shop and replacements for £1 each plus a bit more for...
-
Mmatthewslack replied to the thread First post so be gentle.I didn't know a Carrera Vengeance had a throttle! The UK rules on throttles for EAPC ebikes allow throttle alone from a standing start...
