matthewslack's latest activity
-
Mmatthewslack replied to the thread Are E-bikes overpriced?.Not much to go on in that question! Only a million or three models to analyze...
-
MI went as recommended on the Grin site, their recommendation is to keep to one cross. In retrospect maybe they're more used to 26 inch...
-
Mmatthewslack replied to the thread Help! My next project.Back to your wheel build: why a '1 cross' pattern on such a large wheel with powerful motor? Surely a '2 cross' with its larger spoke...
-
Mmatthewslack reacted to Katymac's post in the thread Disabled cyclist; with one bad choice behind her, needs help with a new bike with
Like.
I think so yes I rode up several small hills - I need to judge slightly bigger ones But changing the handle bars changed my perception... -
Mmatthewslack replied to the thread Disabled cyclist; with one bad choice behind her, needs help with a new bike.Putting aside handlebars and so on, is the amount of help from the motor enough for you, and is the amount of effort you have to put in...
-
Mmatthewslack replied to the thread Disabled cyclist; with one bad choice behind her, needs help with a new bike.It would be useful to know if, in the course of your so far endless quest, you have tried the higher spec mid-drive motors, and whether...
-
Mmatthewslack replied to the thread Help! Mobility issue..Three bargains there, and all in my favourite colour.
-
Mmatthewslack replied to the thread Disabled cyclist; with one bad choice behind her, needs help with a new bike.A bit like building a house. You can have a good house, a cheap house and a quick house. But only two of those three.
-
Mmatthewslack replied to the thread Carrera e subway.There are simple ways to directly test the MOSFETs using a multimeter. Links to that and hall sensor testing here...
-
Mmatthewslack replied to the thread Ebike News.Not in the list of PAS from BSI. Perhaps only listed there when finalised/approved. Surprising a draft version doesn't easily appear in...
-
Mmatthewslack replied to the thread 48 V Bafang KT Build.Physics stops the current because the battery cannot rise to a voltage higher than the input. So it is essential that the 'charger', in...
-
Mmatthewslack replied to the thread 48 V Bafang KT Build.BTW I wouldn't put too much effort into the ice cream outside schools idea as I think you'll get banned immediately. Schools do not want...
-
Mmatthewslack replied to the thread 48 V Bafang KT Build.Most solar ebike systems use a 'boost' solar charge controller and a panel(s) with voltage lower than the battery voltage. The charge...
-
Mmatthewslack replied to the thread Disabled cyclist; with one bad choice behind her, needs help with a new bike.Good luck.
-
Mmatthewslack reacted to Katymac's post in the thread Disabled cyclist; with one bad choice behind her, needs help with a new bike with Like.
Yeah £4k!! I really need to get something sorted I want a bike shaped bike otherwise I'd be sorted - I'm going to be a long time in a...