Recent content by Mike P

Well - bike ran faultlessly for nearly 2000km in all weathers. One day it just decided not to work at all most of the time. Occasionally it would cut in but not strongly. Checked all connectors, made sure battery was fully charged but no joy. Suspecting the motor I tested the halls and coils...

Thanks for that. Actually if it is to do with lights I don't need it anyway as the lights are not run off the motor battery.

That's what I was hoping somebody would confirm. Thank you. Now the issue that remains is the ninth pin on the 1 to 4 connector. Everything I've looked at shows 8 - all arranged neatly around the perimeter. I have an extra that is set slightly off centre. I can't seem to find a controller with...

It's a KT controller. All the checking I have managed to do was the mosfets. Like the motor they seemed OK, but I'm not completely confident that I tested them properly! Even if they were bad I don't think that I could easily replace them due to the way they are soldered to the board as well...

I used a Yose Power kit to convert my wife's mountain bike so she could more easily get to work. It has been brilliant for nearly 2000 km. Recently I have been having trouble, but using my brushless motor tester the motor seems fine. I suspect a controller issue and would simply change this if I...