Recent content by mikeybhoy

Thanks again d8veh, you're right of course, I think I've been a bit quick, not to say cack-handed, with the 'project'. I followed your advise above from another thread. Measuring the voltages above I get 25.9v between yellow and black, 4.9 between red and black. Battery was last charged about...

Hi billadie, that threads an interesting read and glad you got it sorted in the end. So assuming the controller is still OK, I can simply disconnect the torque sensor entirely and run it from the throttle? I read in your thread that the controller has to sense 0v before providing power to the...

Hi d8veh, yes battery has been charged over night and shows full power on the connected power-ometer. There are loads of wires connected to the controller, but if you mean from the motor wheel, there are 3 thick wires and 5 (from memory) smaller wires.

Hi Forum, while working on a job at the local council offices, the staff came around asking if anyone was interested in buying old e-bikes. They had about 12 in total in various conditions (flat tyres, cut cables etc.) but I bagged a UM36X for the princely sum of £25 that was a bit manky...