Recent content by mnaeh

***SOLVED (definitely). It was... drumroll... INTUVIA MOUNT*** I'happy to report that I'm part of the #teamnocutoffs ;) While I completely agree that any of the components can be the potential culprit, for me the guilty one was definitely Intuvia mount. It's just that my "testing methodology"...

***SOLVED... kinda*** https://www.pedelecs.co.uk/forum/threads/bosch-motor-display-cutting-out.32097/post-654362

***SOLVED... kinda*** You can find Bosch 2020 Dealer Manual here. On page 201 there's info regarding new mount for Intuvia (see picture). When a company decides to change the production of a component "to improve contact quality" you can be certain it's simply because the old design didn't...

I know this is an old thread but I still haven's found a solution. I wanted to replace the mount but COVID-19 situation made it dificult for me to obtain one. Now new riding seson is here and I'm once more able to order the given part, I was just wandering did you reuse the existing cable (which...

I know this is an old topic, but I don’t seem to find anywhere a 100% working solution to the problem OP has described. I also have the same problem combined with intermittent power cut-off. My setup (KTM bike, 2019): Intuvia display Intuvia mount with 3 golden pins on the left and 4 silver on...

I found here that even Purion users suffer from the same problem, although it might be a completely different issue. The topic in the link is also an excellent one for all of us who suffer from this issue. Buying new Intuvia mount seems promising. I might even take the plunge, just want to try...

Do you mean you replaced Intuvia with Purion? It sounds like a bit of a downgrade, but if I followed correctly, the problem we are discussing here happens only with Intuvia mounts (meaning Intuvia and Nyon displays), am I right?

Hmm, that sound like a probable solution (unfortunately, as my bike is no unde warranty, so I'd have to buy replacement part). I did stumble upon this solution in couple of places. Just of curiosity, what is the color of the pins on your display unit, not the stand itself. Here's how mine...

A few years later and I realize that this problem is more common that I thought. After a full year of leaving my bike in the bedroom (annoying my wife, but I do not have a garage so...), resting around 40-60 percent charge at room temperature, as recommended for storage purposes in order to...

0.1mm sounds like quite a small gap. I found this picture in the official installation manual. I double-checked gap on my bike and it is within given range. Magnet is positioned just like on the picture.

Update form the trenches First, I would like to make a short disclaimer. In my case the described issue occurs quite rarely, so take all my findings and assumptions as "statistically weak". I simply do not have enough sample data to draw any strong conclusions. I definitely managed to...

Hey, don't worry. I hope you had a great time in Spain. Thanks for the answer. I havn't had any "major" issues since I wrote my last post, but my theory so far is that either speed sensor needs few meters of bike movement to "react" (if the cut-off is very short) or some contact gets loose i.e...

Hi Phil, I'm having the same issue and I was wandering if you could share the solution here, in case someone else stumble upon this thread? Cheers!