Nealh's latest activity
-
I treat my entire drivetrain like shiz, never clean it, I simply chuck more Hypoid-90 on. Chains etc. are so cheap for my bike, aint... -
Nealh replied to the thread New chain !.The only time I change cassettes is simply for more gearing , like Guerney I use gearbox oil and that's it bar swapping a chain out for...
-
Nealh replied to the thread Step through bike for <£1500.If in a flat , where will the bike live ?
-
Nealh replied to the thread An awkward question!.No , it would be in the classs 250w LPM . With the V5 test/certificate one will have the same rights as a EAPC. The 250 LPM class is...
-
Nealh replied to the thread New chain !.I use KMC X10.93 with my Gravel bike, though not much use to you as in longevity as it is a friction drive and not mid drive . My 9sp...
-
Nealh replied to the thread Just joined the community, SwytchBike user.Welcome to the forum.
-
Nealh replied to the thread An awkward question!.One can ahave a legal throttle if the trike is SVA tested and adhere's to the EAPC directive of 250w rated hub, pedal assist fitted ...
-
Just finishing this, it's a Yuba Mundo with a Tongsheng TSDZ8. After numerous front & rear hub motor conversions, this is my first mid...
-
Nealh replied to the thread Yuba Mundo cargo bike with Tongsheng TSDZ8.Yes a converted anologue cargo with mid drive is certainly a cheaper steed then the full on E version and to boot none of the canbus or...
-
Nealh replied to the thread Help! Rubbing noise coming from Bafang RM G010.250.D motor under load.Moisture ingress has been an issue so rusty /dry clutch bearings may be an issue. Repairing the phases will be a good move. Tbh whilst...
-
Nealh replied to the thread Help! My next project.03 Hall error will either be a wire fault or Hall failure . Test the Halls with a meter to see.
-
Nealh replied to the thread Help! My next project.There is another option to try and that is the phase /hall wire swapping , as we tell folks it is a gimme that colour to colour will...
