Nealh's latest activity
-
Nealh replied to the thread LcD Display.One can add LCD 9, 11 + the TF1 & 2 now as well. -
Nealh replied to the thread LcD Display.My default LCD for any KT controller is LCD3.
-
Nealh replied to the thread TSDZ2 Chainring removal.Chain ring as said should simply come away once thr bolts are removed. I fitted a relatively cheap spider and 32/42t rings for a 2X set...
-
Nealh replied to the thread Regarding Yose conversion power kit.On all but one bike I have fitted hubs to , I have had to fettle the drop out for the axle to fit correctly.
-
Nealh replied to the thread YosePower eBay kit.Most drop outs require some filing for a correct fit, OEM bikes are designed specifically for 10mm D/O. a std push bike typically...
-
Nealh replied to the thread Newcomer from the US.The stopping power and safety of a front disc system is the first best upgrade.
-
Nealh replied to the thread Newcomer from the US.Regards rim brakes , although the bike speed is akin to a push bike . It is not the speed but the extra stopping force needed for the...
-
Nealh reacted to egroover's post in the thread Change off mind from yose power to mid drive with
Like.
Hub motors are great Mid-drives are great E-bikes are great The END. -
Nealh replied to the thread Yosepower battery cut out.At seven years the battery cells are likely a bit saggy now , one has to watch carefully the battery bar indicator or voltage readout if...
-
Nealh replied to the thread Is it mad to want two e-bikes?.Like d8veh I have several electric bikes .
-
Nealh replied to the thread Motor cutting out, thoughts?.When fitting a PAS I never fit the disc to the axle , I prefer to bolt the disc to the inside of the smallest chain ring . There is no...
-
Nealh replied to the thread Motor cutting out, thoughts?.It shouldn't slip if you hold it , it should be firm enough to resist slipping. The plastic spline can and do lose grip , you have...
-
Nealh replied to the thread Motor cutting out, thoughts?.I made mention to the motor connector in #23, #32 and #56 which you finally picked up on.
-
Nealh replied to the thread Motor cutting out, thoughts?.A new disc is aligned with the accompanying disc so actual disc diameter matters not.