Nealh's latest activity
-
Nealh replied to the thread Review PS power don't buy they skam you.There will be differing charges if comparing to AliExp shop. There is no scam one has a chioce where to shop. -
Nealh replied to the thread More Seizures.Sales of illegal and dangerous ebikes must be stopped, say MPs and peers
-
Nealh replied to the thread Cyclotricity kit, no Pas but throttle works..That V12 one piece PAS will not work with his KT LCD1 d8veh as he is unable to change the setting in the C1.
-
Nealh reacted to saneagle's post in the thread Cyclotricity kit, no Pas but throttle works. with
Agree.
Pedal sensors are very simple and all work the same. There's a hall sensor that's supplied by 5v (2 of 3 wires), and when a magnet... -
Nealh replied to the thread Cyclotricity kit, no Pas but throttle works..The LCD1 is the basic model which only enables P settings , these are factory set so should need no changes. Regards to the PAS one...
-
Nealh replied to the thread Review PS power don't buy they skam you.PSPower I have never had an issue with them , current prices may be unpredictable with tariffs and shipment being affected by the Oange...
-
Nealh replied to the thread Cyclotricity kit, no Pas but throttle works..Your LCD1 is the basic model so one can't change any setting for a different PAS type (if used) .
-
Nealh replied to the thread Cyclotricity kit, no Pas but throttle works..Buying generic PAS may not work esp if Cyclo have change the wiring sequence , we know Cyclo use KT stuff but the KT stuff is or may be...
-
Nealh replied to the thread 48 V Bafang KT Build.That's the beauty of KT's , like wise I also find PAS 1 more then ample power for nearly all my riding that doesn't involve steeper...
-
Nealh replied to the thread 48 V Bafang KT Build.It was Cwah who use to frequent the forum in the past that had issues with AKM100's he used to operate them at 48v /20a eventually...
-
Nealh replied to the thread Woosh Knocking noise on TCM motor bottom bracket..Contact Woosh to see if they can service it or still have spares on the shelf. Like Wisper they are pretty good at sorting customers out.
-
Nealh replied to the thread 48 V Bafang KT Build.AKM @17a should be fine a s long as one doesn't labour the hub on inclines, best to use PAS 4 or 5 on inclines and keep the speed above...
-
Nealh replied to the thread 48 V Bafang KT Build.If selling on are you letting the new owner know how to change the PW ?
-
Nealh replied to the thread 48 V Bafang KT Build.Simplest P/W to remember is your birth year. G370 has high internal gearing a neat small front hub motor, not yet seen a rear model...