Nealh's latest activity
-
Nealh replied to the thread Pedal assist not working.If one has an erratic odo reading then either one doesn't have an internal hub Hall sensor /speed magnet or the number of magnets... -
Nealh replied to the thread Help with Bafang Bird bike motor.My go to lube for ease of pulling stuff thru tight spaces is to raid the fridge for a bit of spread , slippery as running on ball...
-
Nealh replied to the thread Dropper post fitment.How did she feel how the bike rode compared to the Boshers around her ? Did she feel they were having an easier time of it or were they...
-
Nealh replied to the thread Help! My next project.With my tiny G370 front hub motor I have only used it in PAS 2 with my TS09 even towing a 126+ kg load with my Carry Freedom trailer ...
-
Nealh replied to the thread Help! My next project.Brakes switches can cause issues sometimes , I remember my BBS01 being a right pain with two switches so took the front one off. With...
-
Nealh replied to the thread Help! My next project.It may be, one has a dodgy /intimitent controller ? Apart from my one T06S that gave me heat issues I have never had another TS 0x issue...
-
Nealh replied to the thread Help! My next project.I set current as max with any TS model so TS06 either 17a or 20a, TS09 22a or 25a. Like the TS06 the 09 's come in 22a or 25a flavour.
-
Nealh replied to the thread Help! My next project.From memory as it has been over 6 years since when I had my thermal cut outs the display went blank so affected power supply . I...
-
Nealh replied to the thread Help! My next project.If the T09S got very hot ( too hot to hold or touch for more then a brief nano second) then one would say thermal cut out where mosfets...
-
Nealh replied to the thread Battery Fires.and charging process used.
-
Nealh replied to the thread Help! My next project.How fast was one ascending when the controller got hot ?
-
Nealh replied to the thread Case studies - how has your electric bike changed your life?.Alpha one male taken down a peg or two , well done.
-
Nealh replied to the thread Yose miles.30v imv is a bit too low to take a 36v battery , typically for better life I would look at 34v as a min voltage. Sag will be noticable...
-
Nealh replied to the thread Removing speed limiter.Five years on down the line and we are now seeing many more stories of confiscations and prosecutions , in some areas of the country...
-
Nealh replied to the thread Wisper 705 Torque new battery & controller.No, KT are cadence sensing, once upon a time several years ago BMSBattery did sell a S06 TS controller kit but no more.