Nealh's latest activity
-
Nealh replied to the thread All carbon DJI Velduro Rogue to be Distributed in the UK by Sevenoaks Bikes. (Wisper).SW would likely have had two ends of a bike by now as he does like acrash or two, so surprised if he would go carbon. -
Nealh replied to the thread Woosh Newbie alert ⚠️.One will find a high percentage of oners on the forum do all of their maintenance and a quite a few of us build our bikes from scratch ...
-
Nealh replied to the thread Giant energypak 400.Giant batteries will need a dealer to check it's health as they use CAN type systems, a manual may help you find the function of the...
-
Nealh replied to the thread Pretty step through and no maintenance!.Location /area ?
-
Nealh replied to the thread Ikea ebike controller.Good luck with trying to find one , you may be as fortunate as looking for a needle in a haystack. Santroll are OEM supplied, Try ebay...
-
Nealh replied to the thread Roadrat Alfine 8 with G370 hub build..+1 for the revo shifter , they are sooo much better then thumb shifters. I have simialr shimano revo shifters on my cargo bike and Swizzbee.
-
I`d advise your missus to go with the Alfine 8, i`ve had both and imo the Alfine 8 is much more user friendly, i`ve no need to pause...
-
Nealh replied to the thread Woosh Newbie alert ⚠️.Say what you want to do with it /to it and you will likely get some answers , whether one likes the answers is another thing.
-
Nealh replied to the thread Woosh Newbie alert ⚠️.One will find that with nearly all cycle shops that ; 1. Haven''t supplied the bike . 2. It is a hub bike. 3. It is illegal speed...
-
Nealh replied to the thread Help on wires on a PAS sensor.Years ago I do remember someone coming on here to ID his controller wiring , PAS , speed , sensor , throttle and pas all used exactly...
-
Nealh replied to the thread Help on wires on a PAS sensor.Yep that all sounds good, most china stuff is about using logic. Some listings will ID the 5v, gnd and Signal.
-
Nealh replied to the thread Controller.Any power in watts shown will cease if one isn't peddalling. If the odo speed goes to 0 then it is beause one doesn't have a speed...
-
Nealh replied to the thread Help on wires on a PAS sensor.With the SM plug one should be able to slide off the heat shrink to see the wire colours.
-
Nealh replied to the thread Help on wires on a PAS sensor.Black GND. Red 5v. White Sig.
-
Nealh replied to the thread Help on wires on a PAS sensor.Lets try and make it easy for you . 5v to 5v . 5v will either be colured Red or sometimes Brown is used. Gnd to Gnd . Gnd will usually...
