oldie1982's latest activity
-
OIf you have no truing stand or don't make one, true the wheel up in the drop outs. Use a cable tie around the stay and cut the tail end...
-
Ooldie1982 replied to the thread First time wheel build.
-
Ooldie1982 replied to the thread Strange Pas problem.Yes that makes sense. The one I replaced was a king meter one with a little led light on it. Only activated going forward. I will do...
-
OI think i have a setting somewhere that needs changing on the LCD8H. Bafang 48v Swx02 from Woosh KT LCD8H Everything was working fine...
-
-
Ooldie1982 replied to the thread First time wheel build.Before my spokes arrive i have one question. The rim that i have has every other hole closer to one side. With the wheel flat on the...
-
Ooldie1982 replied to the thread First time wheel build.I ordered 234mm spokes and will give an update on how i get on.
-
Ooldie1982 replied to the thread First time wheel build.Appreciate the help people. I think it got it now. I used the grin video to measure my hub. I did it as best as i could. I got the...
-
-
Ooldie1982 replied to the thread First time wheel build.I have filled out the wheelpro calculator using the correct picture this time. Can anyone confirm that is correct please? I have also...
-
-
Ooldie1982 replied to the thread First time wheel build.I really appreciate that. What a mistake i have made, the hub i have is a rear hub but i posted the picture i found on the net and did...
-
-
Ooldie1982 replied to the thread First time wheel build.Thanks. I have done a lot of reading on that site. It’s also another calculator in using but I get stuck on the part where they ask for...
-
Ooldie1982 replied to the thread First time wheel build.I found the dishing offset from another post which I entered on the grin calculator. How do we work this out from the picture?
-
-
Ooldie1982 replied to the thread First time wheel build.1 x lacing it is. Cheers
-
Ooldie1982 replied to the thread First time wheel build.I take it I go for the longer of the spokes? 251mm or 252mm depending on mine or your calculations? I went and checked the erd again to...
-
Ooldie1982 replied to the thread First time wheel build.Were these builds using the Sapim strong spokes? Or plain 14g spokes? My rim arrived. Measured the erd using two spokes. Repeated it 4...
-
-
Ooldie1982 replied to the thread First time wheel build.Sorry I got confused about the spokes. The elbow on the Sapir strong is 2.3mm but the rest is 2.0mm. The hub motor I have is a Bafang...
