Recent content by oregon

  1. O

    Changing standard Wisper brakes to Tektro

    Thanks esuark, They do look good. Do they come with brake pads?
  2. O

    Changing standard Wisper brakes to Tektro

    Hi all I have a Wisper 905 Torque (2019) and am still using the brakes it came with. I wanted to change to the Tektro Auriga brakes. I have looked online but I am not sure what components I need to buy? Do I need a complete set like this -...
  3. O

    Wisper 905 Torque - First Impressions

    Thanks David Yes, it is indeed my 3rd Wisper! You are right, I am already getting used to the new bike. It is so much more powerful compared to my 2013 bike. I guess I am just too accustomed to the old one, so of course, it will take some adjusting to. It is a joy to ride!
  4. O

    Wisper 905 Torque - First Impressions

    Hi all After my old Wisper 2013 Classic broke down, I recently got a Wisper 905 Torque. I have been riding it over the past few days and wanted to post my thoughts. - The Torque is a big improvement over the Cadense sensor I had on my previous Wisper bike. - The immediate assistance on pedal...
  5. O

    Wispa Bike will no longer power up

    I have my booked into for repair the second week in July by Wisper dealers that I bought it from originally. I hope the repair bill wont be so high that it would be better to just buy a new bike...
  6. O

    Wispa Bike will no longer power up

    OK. Do you know, what is the purple wire that is not connected to anything for?
  7. O

    Wispa Bike will no longer power up

    I will take a photo. Does that mean that there are 2 problems? The 3 blown MOSFSET and the control panel?
  8. O

    Wispa Bike will no longer power up

    Hi, I managed to get the probes into the back of the conenctors. The reading was 40v. Switching the panel on and off made no difference. The meter stayed at 40v. The control didnt even flash. It usually doesnt flash. only occasionally I noticed a flash but just now it wasn't. Everything just...
  9. O

    Wispa Bike will no longer power up

    Hi, I am not sure which is the red wire test?
  10. O

    Wispa Bike will no longer power up

    Which are the battery bullet connectors? The ones at the bottom of the battery or where the charger plugs into? I cannot put the meter probes into the battery at the same time as the battery as on the bike as it sits over the connectors. I did put the probes into the sleeves with the battery...
  11. O

    Wispa Bike will no longer power up

    What does that reading mean?
  12. O

    Wispa Bike will no longer power up

    Results From thick black wire - 09.95 to all all three of the blue yellow and green From thick red - 0.000 for all three
  13. O

    Wispa Bike will no longer power up

    This is the multmeter
  14. O

    Wispa Bike will no longer power up

    I have attached a photo of the controller. I disconnected the main red and black wires and tried to measure resistance but there was nothing. I am not sure I am doing it correctly. I also notice the 2 purple wires are not connected, but connecting them doesnt seem to make any difference. Not...
  15. O

    Wispa Bike will no longer power up

    OK, so I have opened the controller and disconnected a set of red and black wires. I am not sure what to press on the multimeter. Do I hold I put the meter test leads between the two red connections ? I am using a Tacklife DM01M meter. I have chosen 6M on the meter dial. I am not getting any...