Peter.Bridge's latest activity
-
PPeter.Bridge replied to the thread Help! My next project.Full suspension ? Looks like enough room for a battery https://www.facebook.com/share/19B3tEatYu/ Or another full suspension with...
-
PPeter.Bridge replied to the thread Help! My next project.Where do you live (roughly) What sort of riding will you do ? Roads, Trails, off road ? Any preference on wheel size - what size /...
-
PIt's sorted and back in the bike Halfords did it for £20, they trued it as well and gave me a free inner tube when they cut the first...
-
PPeter.Bridge replied to the thread Carrera-E charger connector..all i could find https://www.amazon.co.uk/Powatechnic-IMP-3pin-Charger-Carrera-BS2573600200/dp/B0B5XGWPWC
-
PPeter.Bridge replied to the thread General concensus on TSDZ, ToSeven, and any similar competitors.Yes - I have both hub motored bikes and Bafang BBS02 mid drive and converted a TSDZ8 for my sister. I think both are great, but for...
-
PPeter.Bridge replied to the thread Converting a dead Vanmoof X3.The Bafang G060 and G062 hub motors seem to use an 11 pin juliet adapter...
-
PPeter.Bridge replied to the thread Converting a dead Vanmoof X3.Assuming it's a sensored motor with the standard 9 pin connector...
-
PPeter.Bridge replied to the thread For Sale Bargains.Not UK legal but PSWpower has 26" wheel 48v Bafang G020 hub rear cassette kits with KT controller for £160 + £6 delivery. Add in a 48v...
-
PI'll check later, but you know you need extra clearance to fit the battery to the holder? You need about 20mm above and at the front...
-
PPeter.Bridge replied to the thread PSWPower says Bafang UART controllers can be used with CAN bus BBS01B, BBS02B etc. motors.And / Or set a password on the settings
-
PPeter.Bridge reacted to guerney's post in the thread PSWPower says Bafang UART controllers can be used with CAN bus BBS01B, BBS02B etc. motors with
Like.
Yep, but this doesn't involve changing any settings, "Speed Meter Signals" = 1 by default in firmware, so a close inspection by an... -
PPeter.Bridge replied to the thread PSWPower says Bafang UART controllers can be used with CAN bus BBS01B, BBS02B etc. motors.Could you just change the wheel size ? If you set the wheel size on a 26" bike to 16" then a indicated speed of 15 km/h would equate to...
-
PPeter.Bridge replied to the thread PSWPower says Bafang UART controllers can be used with CAN bus BBS01B, BBS02B etc. motors.No, the Can connector to the battery is optional " Battery Cable: XT60 (same as UART) and a New Battery Communication Cable. If you use...
-
PPeter.Bridge reacted to DenisFpsXIV's post in the thread Help! RockRider ST100 Conversion KIT HELP Needed! with Like.
finished installing the kit yesterday everything compatible and i have to say im amazed how good it turned out
-
PPeter.Bridge reacted to harrys's post in the thread General concensus on TSDZ, ToSeven, and any similar competitors with Like.
If your follow my posting history, I originally thought the TSDZ2 was a POS, compared to my hubmotors. Part of that was not being used...