Recent content by quackstar84

Hello folks. The wheel hub which cames with my Lishui kit works with my kt lcd and controller. Both throttle and pas work. Code number on this Lishui wheel is 95rx. rc250 which when googled comes up being an aikema hub motor. Hopefully this is useful to those whose kt kit wheel stops working.

Yeah ill be using the same lcd and controllers together . Ill double check the pins beforehand. However I'll try this 36v lishuo kit first as I might not mind it. Cheers.

This bike rear tire has quick release and the axle from the hub slides in like butter at the correct angle. Could you use a different donor bike?.

Hello Mate. Good to hear from you. The motor you sent me is still going strong. I've done 1000 miles on it without issue. The noise is still there however it let's people know im around lol. I kinda think it sounds like an hyper mode . Reason I've upgraded is because my donor bike doesn't feel...

This bike has hydraulics as well. I had an issue with the disc brake rubbing against the pads however after I removed this plastic which was screwed onto the disc brake mount it runs without rubbing.

Here's the plug coming from the wheel hub.

This is the kit I bought https://www.ebay.co.uk/itm/125310654581?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=Dey4TymgRmy&sssrc=2349624&ssuid=HVYENfBVTRq&var=&widget_ver=artemis&media=COPY I managed to get it for £326 using a eBay code

One quick question. Is the old kt lcd3 display and controller compatible with the new kit's wheel hub? Cheers.

Hello everyone. Just wanted to thank everyone for their help in the past. I've bought a new bike and kit. I just need to do some cable management but her she is

I didnt charge the battery last night. Ive continued and done 20 miles in 1 hour 25 mins on a single charge. Im happy all time high was 7 miles beforehand.

Cheers I updated. I also put p5 to 15 as recommended in another post hence my mix up. It's c5 04 to 10.

I've just done 10 miles in 40 minutes with no cut outs by changing c5 from 04 to 10. So max power. I get 900 odd watt on pas5 or throttle and 520w ar pas4. The controller and motor just stayed warm. Im going to stick to the max of pas4 as if I need a boost I can use the throttle. Hopefully this...

PC2017 was kind enough to sell me a controller however today it's been cutting out again. Ill just list my kt lcd settings incase there's an issue with them. Thank you for everyone's help so far. P1 87 P2 1 P3 1 P4 0 P5 00 C1 06 C2 0 C3 5 C4 0 C5 04 C6 1 C7 0 C8 0 C9 0 C10 n C11 0 C12 4 C13 0...

Ill find a bulb . Thanks for this idea vfr400

Which one did you buy?