Recent content by rajeshtailor

  1. R

    Mid Drive on a Carrera Vengeance eBike

    Hi Community, So I was part of the thread that added a throttle on the Carrera Vengeance ebike and it’s all great but now I’m craving more power I’m looking at something in the region of 30mph speed (only for off roading). I’m thinking of getting a Bafang High Power Mid Drive motor but wanted...
  2. R

    Baserunner with Suntour HESC motor

    yeah I’ve been in touch they’ve advised on the Baserunner L10 v4 however I’ll most likely have to get an extension cable and splice the end as the connection out of the Baserunner doesn’t fully match the connection to the Suntour Motor.
  3. R

    Baserunner with Suntour HESC motor

    Hi Community, has anyone got any experience with a Grin Baserunner and a Suntour HESC rear hub motor?
  4. R

    Carrera Vengeance ebike battery charger clicking

    So I was reading this thread and it turns out that I can use my existing battery (if I ever get it back from Halfords) with a different controller. Thread
  5. R

    Carrera Vengeance ebike battery charger clicking

    Can anyone recommend if this is an ok battery X-go (UK& EU Warehouse) 48V 13AH Ebike Battery with Charger, Lithium Electric Mountain Bike Battery Pack for 350W 500W 750W 1000W Bicycles Motor (48V 13AH 30AMP) https://www.amazon.co.uk/dp/B07YDFZMZ8/ref=cm_sw_r_cp_api_glt_i_2HK77KP0GY0G73BDDP4A?psc=1
  6. R

    Carrera Vengeance ebike battery charger clicking

    I also can't seem to locate the dimensions of the integrated controller size.
  7. R

    Carrera Vengeance ebike battery charger clicking

    I see your point, with the integrated controller I'd have to cut the wires to expose the connections, where as with the standalone controller its already separated (hall wires and motor phase wires)
  8. R

    Carrera Vengeance ebike battery charger clicking

    I was looking at the below version but obviously I would have to get a compliant battery. But my main concern is the wiring would I be able to wire it with my existing motor?
  9. R

    Carrera Vengeance ebike battery charger clicking

    Wanted to ask if anyone knew the difference between the controllers that are built into the batteries and the stand-alone controllers do they essentially have the same performance?
  10. R

    Carrera Vengeance ebike battery charger clicking

    So I checked out where the cranks fit on the BB and it looks like I could potentially try a Dual Hall Sensor PAS with the teeth connections that fit into the BB.
  11. R

    Carrera Vengeance ebike battery charger clicking

    i like your idea of getting a 9 mosfet to future proof in case one day I change the rear hub motor
  12. R

    Carrera Vengeance ebike battery charger clicking

    I’m going to put it in some kind of container or bag it definitely won’t fit where the current controller sits.
  13. R

    Carrera Vengeance ebike battery charger clicking

    Th The controller is a 9 mosfet ( KT36/48SVPRM-SJT02L )
  14. R

    Carrera Vengeance ebike battery charger clicking

    I've managed to find this what do you guys think?