Recent content by rig the jig

I'll post a list of the parts used and the programme settings ,for anyone who wants to change from Swytch, thanks again guys. Rig the jig

Thanks so much guys , my electric bike seems to have come back to life, you made an old man very happy. I'll drink a pint of Guinness tonight in your honour. C1 set to three did the trick. Rig the jig.

You have'nt ansered my question.

I ordered an 8 magnet unit, but received a 12 magnet one instead. Do you think that is the problem ??

Hi Guys, I have a swytch front wheel, and I'm changing to standard system, I bought a Yose battery, a KT LCD 5 display, a KT 36/48 volt 9 pin motor controller, a 12 magnet PAS, . I programmed the unit with the settings that were posted by a lad changing from Swytch, but keeping the Swytch...

, The extension nine pin connector I ordered was faulty, so I have an old one that works ok, walk assist is working, but no motor activation when I rotate the pedals, although the LED on the PAS sensor flashes. I don't know where to go from here. I'm using a 12 magnet PAS, I'm thinking of making...

Thanks for that , I'll do some more checking.

I have a spare 9 pin round connector with cable, that would allow me test the continuity of hall sensors, can they be replaced if faulty, its a bafang hub motor. Would it be possible to buy a sensor board with the sensors on it, that way I could eliminate the sensors as the problem. I need to...

Walk assist is now giving error 3 , I have the other parameters set, max speed 25Kms, wheel size 700c, , with the pedal assist connected, I'm getting a flashing led on forward rotation, my next trick is probably to extend battery cables temporarily, and connect the controller in without the...

Hi all, I had a swytch system, I think is was iteration 2 , which I decided to replace with a bigger battery, KT controller, 12 magnet PAS, a twist throttle, and a KT5 lcd display. the only swytch part left is the 250W motor, with a nine pin connector. After assembling all the bits, and using...

Thank you so much for yur help, Rig the jig

Hi Ihave replaced the motor controller on my e bike, the existing throttle is a wisper twist throttle with a red, black and grey wire. the controller has brown black and white wires in the throttle connection. Would I be right to connect red to brown, black to black, and grey to white. Any...

HI at the moment I am converting a Swytch bike to a non swytch bike, I have ordered the controller , display, PAS, and throttle, they will be with me in about 4 weeks, then I will have a spare swytch handlebar sectionj with all the connections intact on it. If you are interested I can arrange to...

Would any one pick a kt controller and display, 17A 36V that I could wire in to a swytch bafang sensorless motor with a 9 pin connector, with a PAS sensor, and a throttle control. I bought a controler but the connections are 8pin plus 9 pin motor connection, also no paperwork come with the...

OK, I attach photos of the two leads, the yellow one I presume is the PAS, and the black connector is an 8 pin .