saneagle's latest activity
-
saneagle replied to the thread Motor Blown Up?.Waterproof doesn't help. It's air that does the damage and any vibration finishes it off. -
saneagle replied to the thread LcD Display.You can set the speed limit in the LCD settings. I was talking about the natural unrestricted motor speed. My one does about 26 mph, but...
-
saneagle replied to the thread First post so be gentle.If another spoke breaks, don't waste your time replacing it because they will all start to break. Replace or rebuild the wheel when that...
-
saneagle replied to the thread Motor Blown Up?.Do not use any of those type of connectors on an ebike. They're designed for stationary indoor use. In ebike conditions, the exposed...
-
saneagle replied to the thread LcD Display.The speed with the wheel off the ground depends on the motor constant (Kv). When the motor spins it becomes a generator. The voltage it...
-
saneagle replied to the thread General concensus on TSDZ, ToSeven, and any similar competitors.I don't have strong feelings about anything. I only use pragmatism. I use both types of motor regularly, so I'm in a strong position to...
-
saneagle replied to the thread Updating controller on a 2016 Peugeot electric bike..Brainpower controllers are normally dual mode, though the listing doesn't mention that and the picture of the label is too fuzzy to...
-
saneagle replied to the thread Converting a dead Vanmoof X3.While you wait for the controller, it would be a good idea to open up the motor to see what the extra wires are for. There are a lot of...
-
There are almost certainly different displays on different Greenedgebike models. I suggest you post a photo of the display. Also see if...
-
saneagle replied to the thread Converting a dead Vanmoof X3.A set of KT stuff can be had for £60 from China. A Brainpower or similar can be had for about £35. The KT feels much better when riding...
-
saneagle replied to the thread First post so be gentle.You need to repair those spokes very soon or your whole wheel can collapse. On any bike, if one spoke goes, it's nothing to worry about...
-
saneagle replied to the thread Looking for advice on 48v battery.Those dimensions look right as far as I can measure with a 12" ruler.
-
saneagle replied to the thread vitesse battery.I'd be surprised if any bike specialist knows how to do it or would want to. By the looks of it, you remove the forks, remove the plate...
-
saneagle replied to the thread LcD Display.Often, it's press and hold the two buttons to save the settings. That's how a KT controller works, anyway, which is a massive advantage...
-
saneagle replied to the thread Motor Blown Up?.Solder them together. You'll probably never need to disconnect them again, and if you do, you can cut them. All that is a lot less work...
