saneagle's latest activity
-
saneagle replied to the thread Capacitors in KT Controller blown.It needs to drop the voltage by around 20v at a current of between 100 and 200mA, so it'll be 100 Ohms to 200 ohms. Colour look like... -
saneagle replied to the thread Battery Fires.You devil!
-
Dendrites? :p ;) .
-
saneagle replied to the thread Swytch MK2 (Air) motor — want to reuse with KT controller + battery — advice needed!.All controllers are comparable with the Swytch motor because they all work the same. There are basically three categories: For...
-
saneagle replied to the thread Kickstand on Wisper 905 (2019).Check the distance between the screw holes. Most standard ones are 40mm between centres. If that's what yours is, you can use this one...
-
saneagle replied to the thread Battery Fires.I've been thinking about battery fires. 12 years ago, I used to do a lot of battery repairs. The quality of the batteries and cells then...
-
saneagle replied to the thread bf rmg06 36v 350w (10) Suitable controller?.No need to be sorry. Everybody seems to get it wring. I wondered why. Here's where the name came from 14 years ago. How things have...
-
saneagle replied to the thread Battery Fires.They couldn't do anything with those buses. They were an embarrassment to everyone. I wouldn't be surprised if that fire had a little...
-
saneagle replied to the thread bf rmg06 36v 350w (10) Suitable controller?.The LCDs work as a switch for the controller. The power for the controller's CPU and all the sensors runs up the red wire to the LCD...
-
saneagle replied to the thread Bafang BBs02 Head Light.Why can't you simply disconnect the wires where you connected them then, which would be a much better solution?
-
saneagle replied to the thread Bafang BBs02 Head Light.You can just insulate the ends as long as you're careful not to let the wires touch. Normally, the lights would be fitted to a connector...
-
saneagle replied to the thread Modifying to Torque Sensing.That was only one complaint. The other was that he couldn't regulate the power to how he wanted it,which caused his range to go down, so...
-
saneagle replied to the thread Modifying to Torque Sensing.That's sort of true, but not what you want. Take your Rambletta. You select level one, start to pedal, and it immediately goes to 8 mph...
-
saneagle replied to the thread Battery Precautions.From the stories I've heard, my judgement and a bit of postulation, batteries are catching fire mainly on delivery bikes and scooters...
-
saneagle replied to the thread Engwe c20pro controller replacement.If I were in that position, I'd cut off bothe connectors and join the wires together directly. None of the carry any significant...
