saneagle's latest activity

  • saneagle
    Show a picture of the LCD and the label on the controller so we know what you have.
  • saneagle
    saneagle replied to the thread 48 V Bafang KT Build.
    No, it'll be fine. I used to run the smaller ones at 17A.
  • saneagle
    saneagle replied to the thread 11-32 7 speed freewheel.
    They're absolutely fine. We all used to use them before cassette motors became mainstream.
  • saneagle
    saneagle replied to the thread 48 V Bafang KT Build.
    I prefer AKM motors. They're generally very reliable and they have the advantage of a higher reduction ratio than the normal Bafangs...
  • saneagle
    It depends on your motor's winding speed. Stick a magnet on it and use a cycle computer to show it's maximum rpm when you power it up...
  • saneagle
    saneagle replied to the thread 48 V Bafang KT Build.
    I don't know what you're hearing, but most square wave controllers make a sort of electric motor sound from the motor. The slower you...
  • saneagle
    saneagle replied to the thread More Seizures.
    There's no legal limit to how much power you can use. I already got someone a letter of apology from the police and his bikes back when...
  • saneagle
    saneagle replied to the thread 48 V Bafang KT Build.
    Have a look at the label on the controller. If the designation number starts with SVP, it's a sinewave one, so should be quiet and...
  • saneagle
    saneagle replied to the thread Bikkel Bike Ibee.
    That looks like a Tongxin motor. Sorry to mislead you. I should have read the thread from the top. When you mentioned six screws, I...
  • saneagle
    Why are you making things difficult for yourself? You don't have to squeeze anything into your existing battery case. Chuck the battery...
  • saneagle
    saneagle replied to the thread Bikkel Bike Ibee.
    Show some photos.
  • saneagle
    saneagle replied to the thread Front hub problem..
    Don't let the motor give power when it makes that noise, otherwise you can blow the controller. It's a connection problem between the...
  • saneagle
    If the battery has only two wires, you can use any 36v battery you like, or you can get a 48v controller set and a 48v battery to give...
  • saneagle
    saneagle replied to the thread Can someone help me please??.
    The one I see has coloured wires going into it!
  • saneagle
    Why don't you pedal the bike up to the motor's maximum speed and give us the data on watts vs speed, so we can see where the ramp is and...