saneagle's latest activity
-
saneagle replied to the thread Prices of the electricity we use to charge.You've no idea how many were actually sold. That's just a press release from the fake media that you read. -
saneagle replied to the thread Help! My next project.It can be legal when AKM stamp 250w on it.
-
saneagle replied to the thread Prices of the electricity we use to charge.They said that about the VW Buzz three years ago. Three years later, they're selling 2022 registered ones with zero miles at huge...
-
saneagle replied to the thread Carrera E Vengeance.Unfortunately, Suntour don't give out the battery error codes. All we know is that it's indicating an error, which is probably a low...
-
saneagle replied to the thread Help with Bafang Bird bike motor.The phase wires are normally soldered to the coils, not the pcb.
-
saneagle replied to the thread Pedal assist not working.Simple answer: Set P2=1. If that doesn't fix it, you need to fit a wheel magnet type sensor.
-
saneagle replied to the thread Help! My next project.Good point, Benjamin, disconnect the brakes and see if the problem goes away.
-
saneagle replied to the thread Carrera E Vengeance.Show a picture of whatever is flashing so that we know which version you have, and describe exactly which lights are flashing so that we...
-
saneagle replied to the thread Help! My next project.Software either works or not. It can't glitch. There are only two possibilities: 1. You have a connection fault; 2. Temperature is going...
-
saneagle replied to the thread Help with Bafang Bird bike motor.The way I repair them is to buy a motor cable from eBay for £10 or less from AliExpress if you can wait a week. Unsolder the 9 wires on...
-
and charging process used.
-
saneagle replied to the thread Help! My next project.Q128 has an internal speed sensor, but maybe the magnet has come unglued.
-
saneagle replied to the thread rear view mirror.Zefal Cylops is the best I've tried. There are other mirrors from Zefal that are also pretty good, but I find the Cyclops better in the...
-
saneagle replied to the thread Help! My next project.The speed reading comes from the speed sensor. If there's no speed signal from it, or if you have P1=0, the controller will take the...
