saneagle's latest activity

  • saneagle
    There's no real heat in there, so should be OK. I think those LCDs come apart if you heat them up a bit to melt the glue, like you do...
  • saneagle
    It's normally C4=3 for a legal throttle.
  • saneagle
    Yes, they should be OK to manage the battery properly. Don't use recycle cells for an ebike.
  • saneagle
    saneagle replied to the thread More Seizures.
    Police always want to finish interactions with words of advice. I think they're trained that they must do that as a minimum. Here...
  • saneagle
    saneagle replied to the thread More Seizures.
    I'd like to know how the guy managed to cram a 560KWh battery into a frame bag. At 15 w/mile, he'd get a range of 37,300 miles. Joking...
  • saneagle
    Those sort of projects are good for fun, but not worth it if your plan is to get a working ebike. You can buy 36v batteries ready to go...
  • saneagle
    saneagle replied to the thread brakes.
    That's the quickest an easiest way to do it. It works very well. No need to make it more complicated; however, it only works if the...
  • saneagle
    MiRider bikes have what they call a boost button, which causes the motor to give power as long as the pedals are turning, so that you...
  • saneagle
    saneagle replied to the thread Wisper 803.
    The fuse is in the battery, so if the problem persisted after swapping batteries, it's not the fuse, so you can forget about that.
  • saneagle
    saneagle replied to the thread Wisper 803.
    Observation of what happens on the LCD at the time of the cut-out would be the most useful thing you could do, as it shows the change in...
  • saneagle
    saneagle replied to the thread Wisper 803.
    You could try recording the LCD with a video camera if you have one. You can get 1080P ones from Aliexpress for £3 now, or use your...
  • saneagle
    Some good points in it, but he's working for Park Tools. Most of us don't have them, and as long as you have basic DIY skills of...
  • saneagle
    saneagle replied to the thread Wisper 803.
    Just another thought about something that could cause your problem. The motor connector near the motor has a line that shows how far it...
  • saneagle
    saneagle replied to the thread Wisper 803.
    I was only joking. I knew it was atypo. I was just waiting for details of what your problem was. That VR400 was terrible. He made out...
  • saneagle
    saneagle replied to the thread Wisper 803.
    It's unlikely that it's a reliable bike, but you're probably correct that it's used folding and electric because if it's an 803, it's a...