Sparksandbangs's latest activity
-
SSparksandbangs replied to the thread Crank removal.I would have to see the bit that remained in the frame. Does the other side unscrew? Best advice I can give is don't rush into...
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.Nearly forgot. Did some soldering to firm up some of the connections and restock my box of spare Wago connectors. Soldered in a 4 pin...
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.Changed the speed source to internal and disconnected the white speed signal wire. No reading on the display but that is not unexpected...
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.On checking the speed source is set to internal. Which is why it is coming from the halls. I'm not sure whether or not this controller...
-
SSparksandbangs replied to the thread KT controller walk assist.Potential to be an amusing anti theft device. Leave it in reverse when you put it in the bike rack at the newsagents.
-
SSparksandbangs replied to the thread KT controller walk assist.Think it's on all the newer KT controllers. My LCD3 definitely has a C15. https://www.pedelecs.co.uk/forum/threads/kt-c15-parameter.44706/
-
SSparksandbangs replied to the thread More Seizures.Public urge Carlisle Neighbourhood Policing Team to understand electric bike laws
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.Looking at my coding last night for the assist it suddenly becomes clear what I've done. In the original code for using an LCD3 it just...
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.Lishui controllers have better hardware. They are smaller with a more powerful processor. The stock software in the KT is better for...
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.Plan is not to live up to my name.
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.I have a FT232 USB UART Board but unfortunately it was unsuccessful when I tried to flash through the display connector. It's taken days...
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.I’ve tweaked the code in Eclipse. Fairly sure that I’ve set up all the parameters correctly. Changed the display to the LCD3. Go to...
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.Followed the instructions from the Wiki. Connected ST-Link V2. Opened the Java tool. Set up the battery levels, switched off torque...
-
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.And the next problem I can identify the programming port but terminals are not identified. An internet search suggests the configuration...
-
-
SSparksandbangs posted the thread Lishui Controller Modification - Firmware Flash Project in Technical General Discussion.I’ve had the urge to tinker with firmware for ages and have decided to take the plunge. As I want to use the bike while I'm...
-
