thelarkbox's latest activity
-
thelarkbox replied to the thread Newcomer from the US.Hi and welcome, Expectations of range and speed alongside details of the terrain covered (hills?) should guide you towards the optimal... -
@thelarkbox, it's a bit hacky, but here it is. Self tapping screws and some spacers (though really short screws would work!). The metal...
-
thelarkbox replied to the thread going backwards.What controller? link? What bike? link? Your motor runs backwards? and you have swapped 2 phase wires?
-
Well that's me all stickered up. All the information on them is true.
-
thelarkbox replied to the thread Yosepower battery cut out.The cable tie was the second phase of my 'fix' initially I swapped the battery/base connectors from spade type to the round pin type...
-
Great idea. I like the folding pedals. I bought some for my bike but I never fitted them because I moved to a new house and don't store...
-
thelarkbox reacted to egroover's post in the thread Change off mind from yose power to mid drive with
Like.
Hub motors are great Mid-drives are great E-bikes are great The END. -
thelarkbox replied to the thread Is it mad to want two e-bikes?.Perfectly Natural once the utility of an ebike is realised ;)
-
Correct. You're mad to want two ebikes. I'd get yourself tested or read a few books on lateral thinking to broaden your mind. You should...
-
thelarkbox replied to the thread Axel issue.#1 If you suspect the brake pad exchange? temporarily remove the calliper and and test ride the bike for 40m or so or until the knock...
-
thelarkbox replied to the thread Motor cutting out, thoughts?.i suggested moving the magnet disk closer first ;) and if then your problems persist and your convinced its a controller issue the #1...
-
thelarkbox replied to the thread Apocalypse Bike Builds at BESPOKED Manchester.next time i need a dick to design something useless i know where to go.
-
thelarkbox replied to the thread Yosepower battery cut out.The Hailong battery and its mount on my 2nd bike have both been through the wars with sun warped plastic and some of the securing lugs...
-
thelarkbox replied to the thread Motor cutting out, thoughts?.Visit www.ebikes.ca ->Learning->Troubleshooting for a mosfet test walkthrough to test your controller, meanwhile minimise the magnet...
-
thelarkbox replied to the thread Making a torque throttle instead of a speed throttle for a cheap controller.My encouragement to have an arduino go isnt so much to resolve the above solved problem but to expand the options for solutions to new...