Recent content by tunznath

Happy to hear the kt conversion works, interesting 26 29er setup, nice to put all the links as well, i have way too much work in my own garden tho algarve would be nice

The early Yosepower kits were all KT controlled AFAIK until about November, December 2019, when they changed from KT to Lishui controllers, my wifes yose bike is KT Controlled My yose bike was lishui controlled but is now KT controlled, I prefer KT controlled

I got my Lishui controller and LCD in a kit with the wheel kit, I am thinking of keeping it for a spare, now that I have converted to KT

I have fitted the KT controller, lcd3 and wiring loom and I am much happier, the bicycle works exactly like my wifes one that was supplied with kt components, the power is the same, taking it up the track behind our house was great, cannot notice any performance difference, I have yet to do a...

Thank you for the input, I will try them

Ok will take the bicycle up the steepish track behind the house and conciously think about feel of the ride and report back

Hi Vfr400 P3 is set to1, when I put the KT extras together the PAS wasnt recognized, the throttle worked but no PAS , the seller said to set C1 = 05 which recognized the PAS, but it seems to kick in a bit harshly It was originally set to C1 = 02 and the pas wasnt recognized Any ideas?, For...

Finally retrofitted a KT controller and LCD3 onto the "Lishui" system - works well will give more info if people want

We use our bikes for exploring off road here in the Azores, where the islands are volcanic so they spend a LOT of time climbing, having lived in Surrey, the hills wont give you problems, the mirrors are a new addition for us because with the noise of the wind and the motors - cars sneak up on...

Heres a pic of the bar setups

I had shimano Hydraulic rear discs, and just replaced it with a shimano cable disc caliper and used the yose levers, on the bar right bar I have shimano revoshift selector and, Yose throttle and yose brake lever, on the left i have shimano hydralic lever Yose LCD selector switch and the shimano...

I have converted my lishui controlled yosepower kit to KT controller and LCD3 and 1 to4 wiring harness, it works but I need the best C or P parameter for the PAS sensor, it is a bit fast and harsh-ish when it kicks in, but I am extremely happy with the result so far, in my opinion my wifes bike...

Muito bom!

Do you have a prefered supplier, so you are not using rear motors , that means a bafang front? What are your thoughts or reasons for this?

If they are tops glued into the grips I have 2 cases in my Loja - (shed ) waiting to donte themselves, weird that here they prefer Sagres