Recent content by UnclePuncher

  1. UnclePuncher

    Help with charger for Urban Mover UM44 (kl3688cr3 BMS)

    Hi all, I have an Urban Mover (24v). I bought it from a neighbour without a charger. Battery still has charge and works (I've been using it with my electric chainsaw). But I need to sort out the charger. I bought a new 24/28v ebike charger on ebay but could only find one with a 3 pin plug...
  2. UnclePuncher

    Help! Hi all, just bought a 'broken' ebike. Some help needed. Falcoln Turbine.

    Display arrived yesterday. Fitted it and got it all setup. Took a while to find the correct setting but C1-3 seems to be the best. Definitely going to have to explore some of the other settings when I have some time. I've got 2 kids under 3 years old though so free time is a bit of a foreign...
  3. UnclePuncher

    Help! Hi all, just bought a 'broken' ebike. Some help needed. Falcoln Turbine.

    I bought this display. https://www.ebay.co.uk/itm/24-36-48V-KT-LCD4-LCD-Display-Panel-Meter-Controller-For-Electric-Bicycle-E-bike-/115125211579 Unfortunately they've sent me one with a female cable on (not male as per the listing). Looks like I'll have to return it and buy another. I could buy...
  4. UnclePuncher

    Help! Hi all, just bought a 'broken' ebike. Some help needed. Falcoln Turbine.

    Fantastic. Thanks Neal. Much appreciated. I was thinking of getting a better display at some point.
  5. UnclePuncher

    Help! Hi all, just bought a 'broken' ebike. Some help needed. Falcoln Turbine.

    Thanks Neal. I suspected it may be something like that. I'll look into getting a better display. Looks like this is about the cheapest option. https://www.ebay.co.uk/itm/265377600538 I'll have to have a bit of a look to see if it has the option to change the C1 value. Could just buy a...
  6. UnclePuncher

    Help! Hi all, just bought a 'broken' ebike. Some help needed. Falcoln Turbine.

    I linked the controller before but its here: https://www.ebay.co.uk/itm/174629467907 Display is one of these. Not much to it. The 6km/h button doesn't do anything. https://www.amazon.co.uk/Melodyblue-Electric-Bicycle-Waterproof-Controller/dp/B09B9T1831
  7. UnclePuncher

    Help! Hi all, just bought a 'broken' ebike. Some help needed. Falcoln Turbine.

    Yes. Very small and I can't see a way of adjusting it. Its a complete unit. Nothing to move. Back pedaling doesn't cause the LED to blink.
  8. UnclePuncher

    Help! Hi all, just bought a 'broken' ebike. Some help needed. Falcoln Turbine.

    I took some clearer photos of the sensor but I can't seem to upload them at the moment. My phone doesn't appear to want to upload photos I took with the open camera app. Not sure why.
  9. UnclePuncher

    Help! Hi all, just bought a 'broken' ebike. Some help needed. Falcoln Turbine.

    .. OK so if I leave the pedal arm in a particular orientation the LED will stay on. But a slight movement either way turns it off. I just noticed it did this, which is handy for the photo. It'll blink a few times during a single pedal revolution.
  10. UnclePuncher

    Help! Hi all, just bought a 'broken' ebike. Some help needed. Falcoln Turbine.

    Thanks again Neal. I'll get a photo of the PAS. There is nothing really to adjust unfortunately.
  11. UnclePuncher

    Help! Hi all, just bought a 'broken' ebike. Some help needed. Falcoln Turbine.

    Thanks. LED flashes briefly as the pedals turn. It doesn't stay on. I can't test the voltages once its connected and the bike is on. Its one of these yellow cables. Which is Julet isn't it? Going to a speed controller with the same connectors. This one to be precise. .
  12. UnclePuncher

    Help! Hi all, just bought a 'broken' ebike. Some help needed. Falcoln Turbine.

    I had a bit of a look to see how I can test if the PAS is working (before I noticed the light) but can't seem to find a way. Surely it'd give some kind of a signal as I pedal from magnets passing over the sensor. Tried testing it using my multimeter on resistance mode but nothing registered.
  13. UnclePuncher

    Help! Hi all, just bought a 'broken' ebike. Some help needed. Falcoln Turbine.

    Hi again Bike is working fine. Apart from I can't get the pedal assist/cadence sensor to work. I'm just using the throttle which is ok but not ideal. I was waiting on a 3 pin julet extension as it wouldn't reach the speed controller since I relocated it. I've got that now but its still not...
  14. UnclePuncher

    Help! Hi all, just bought a 'broken' ebike. Some help needed. Falcoln Turbine.

    Mine appear to be a push switch. I took one apart. The blade hits the pushbutton (in the body of the lever).