vfr400's latest activity

  • V
    vfr400 replied to the thread Controller Light Output - Uses?.
    I'm not sure what you're saying, but if you have a three wire brake connector and you want to connect a 2-wire brake, it should be...
  • V
    Try the other way round then. Maybe the fall damaged the torque sensor. Disconnect it and see if the bike works with the throttle...
  • V
    If he's Polish rather than East German, it's Andrew, the guy in my photo, who I know. If I remember, I'll phone him tomorrow and find...
  • V
    I think that you might have damaged the throttle cable from the fall. Follow the cable from the throttle until you come to a connector...
  • V
    I think you might have figured it out correctly, but I have some reservations. If it's an analogue one, the green wire gives an analogue...
  • V
    vfr400 replied to the thread Newbie looking for help.
    That's it above. You need a couple of washers or some sort of spacer on the axle between the motor and the drop-out. Arrange the spacers...
  • V
    vfr400 replied to the thread Dead HESC.
    If I take everything you said at face value, my logic says that the motor connector became dislodged in the downhill ride so that there...
  • V
    vfr400 reacted to Nealh's post in the thread Chain lube with Like Like.
    Snake oils/lubes are good business for sellers, they sell very small quantities for an inflated price.
  • V
    Can we have some more information about how the bike suddenly working? Were you going up a hill, stopped at traffic lights, went over a...
  • V
    vfr400 replied to the thread Newbie looking for help.
    Yes, just pull or lever the forks apart to get the motor in. All bikes have the same 135 mm wide rear forks. Its a standard. There are...
  • V
    vfr400 replied to the thread Coyote connect.
    Before buying a new one, you need o determine where the fault is because these devices often indicate a fault elsewhere. Their main...
  • V
    vfr400 replied to the thread Newbie looking for help.
    OK, thanks, that makes sense now. Cassette motors are about 10mm wider than the frame, so you have to spring it in. You might need a big...
    • planks.jpg
  • V
    vfr400 replied to the thread Newbie looking for help.
    Can you show us what you've got? Is it a front motor kit? What is "it" that's too narrow, the motor or the fork?
  • V
    vfr400 replied to the thread Help please.
    It's not an s866. You better show us what it is.
  • V
    You can get cheap batteries on German Ebay. Search for Panasonic Akku