Recent content by Wads

Update as promised. My Chopper is now working again! Special thanks to top man Stalkingcat who kindly came round & fixed the bike. Turned out to be the controller, which he swapped over for the one suggested earlier in the thread. He then managed (Without a wiring diagram) to work out how to...

What great response! Thanks everyone. As I now have a fair few options (Including two kind offers of help) to be going on with & don’t like to use peoples time unnecessarily I’d just like to say thanks for all the information & hang fire for now. I’ll post back later with the outcome of my...

Stalkingcat, PM on its way

Thanks again for all your help. I think I'll buy one of these controllers plus the unit for running the lights you suggested & get re-wiring.

As long as you don't look too closely at the welds ;-) I got the bike for £35.00 as a non runner from a customer of mine & managed to get it running (Just a very obvious broken wire). Rode it around for a while & thought this is great but looks a bit Granddad'ish so chopped it up & ended up...

Hi Paul, Thanks for the link, especially as it has some wiring info that I've got half a chance of understanding! It says 800w but I'm pretty sure my motor is either 200w or 250w does that matter? Also, no mention of amps but I guess I can email them to find out. As you say great price but...

Hi, The battery pack has three 12v lead acid type batteries wired in series giving 36v, I’m not sure of the amps but could take it apart to see if there’s any makings on the batteries. The motor only has two wires going to it so, although I don’t completely understand hall wires, I think...

Hi, I built a chopper style bike using a Sakura Shopper bike as a donor & having ridden it with no problems for about 100 miles it has developed a problem. I’ve had no experience with electric bikes up until now so have limited knowledge & wondered if anyone could help with the following...