Wayners's latest activity
-
Don't let the motor give power when it makes that noise, otherwise you can blow the controller. It's a connection problem between the... -
Wayners replied to the thread Front hub problem..Seemed to be the thinner wires. I've been on a test ride and all good so I think I got away with it
-
Wayners replied to the thread Front hub problem..This was causing the vibration and noise. I'm chuffed I've fixed it as I was worried about further damage
-
-
Wayners replied to the thread Front hub problem..Brilliant. Thanks @Benjahmin Found the problem. Cable rubbing against front tyre. Can't upload picture as forum error but I'll update...
-
I've got a front hub problem and I'm not sure what is wrong. As I'm riding I get a sudden large amount of vibration from the hub and a...
-
Wayners replied to the thread Yose and Hailong.Ok. I was thinking of a connector but keeping it waterproof was my concern. I like the Idea of soldering end from the battery mount to...
-
You will need to extend the wires from the battery connector, so solder on a pair of 14g wires, run them to wherever you want to have...
-
I use XT60 connectors. You can get black ones if you want a stealthy look:- https://a.aliexpress.com/_EucorMm I also ordered a couple of...
-
Wayners replied to the thread Yose and Hailong.Hi all. I've bought a battery mount without the built in controller as I have a kt controller. How would I connect battery power cable...
-
My current ride is approaching 20kmiles. It's a front hub Ezee and I think the whole ensemble is getting a bit old. Not only that but...
-
Wayners replied to the thread For Sale Bargains.£523 bike Link to bike in the YouTube description
