Help me with excess wire.

flik9999

Pedelecer
Dec 11, 2016
164
29
32
london
Hey so I finally got the cyclotricity 250W front hub installed. However they gave me way to much wire so my bike that I kinda converted cos I liked the look of vintage puegeots looks like a complete mess of wires everywhere.

Are there any bags or something that I can place the wires in to make it not look so messy. What about wrapping it around the seat tube?
 
  • Like
Reactions: Audio2

Nealh

Esteemed Pedelecer
Aug 7, 2014
19,991
8,173
60
West Sx RH
You could try a small frame bag or small top bar pannier to try and hide excess wire in or if handy cut and solder the wiring and cover each joint with heat shrink and then a larger section of heat shrink over the whole joint.
 

Tabs

Esteemed Pedelecer
Jul 1, 2016
279
132
64
Scotland
You need to try different ways to route the wires before you lock it all down (and even then you'll probably find a better way to do it)
 

Nealh

Esteemed Pedelecer
Aug 7, 2014
19,991
8,173
60
West Sx RH
Show us a pic of your bike with kit installed a lot also depends on where the controller is mounted.