Search results

The quality of the freewheel [screw on] is better than the 7 speed it replaced, the gear indexed ok but as every part swapped is new some tinkering is required but once set up all good Now the acceleration has returned but now still has a good top speed the total wheel dia is almost...

Not seen one like that on the bbs i have used ,post a pic of the motor

Had a neighbour ask me to look at one today, the rear wheel had locked up after the owner had a low speed crash into a ditch in the wet and slippery mud bike is used to go to and from stables The rear end had bent the frame :eek: the disc mount moved and the rear disc bent a quick...

Could it be a bbs01 clone or the very early model more pics required any cables damaged can you disconnect the brake cut outs one at a time if fitted ?

The 52t front chain ring trial proved to be a compromise to far , had to give up with the 7 speed set up after a 28-13 and a 28-11 as the hill climbing ability suffered but great on the flat Plan b replace with a 10 speed gear set but rear wheel is a screw on freewheel and just hard to find...

Have to agree a fat bike and the bbshd are a great combination :)its amazing how hill climbs in the wet are no longer a problem, but hate hand cleaning the mud

No it was the angle grinder ;) or perhaps the dog chewed the front corner :oops:

Does this help the case is modified at the front cut and fibreglassed

Have fitted both bbs01/2 into a zobop the older green version frame size large the hailong 1 battery will fit in the triangle 90mm and a tsdz2 into a 2017 version the bbs motor fits ok but the tsdz2 needs an anti turn bracket

usb drivers have used this resource for usb to rs232 :) https://www.ftdichip.com/FTDrivers.htm

Might be good for hard to find spares or an odd build due to drop out width https://www.ebay.co.uk/itm/203178712946?ul_noapp=true[/URL] noticed bankrupt bike parts are getting some weird e bike bits now

Thanks for that nealh guessed at 224mm fingers crossed

https://www.ebay.co.uk/itm/Heat-Shrink-Tube-Tubing-Wrap-Sleeve-Blue-170mm-x-metre-18650-Battery-UK-Stocks/124069526891 so if i get 170mm flat that should do it The pack is well made inside spacers and no glue gun

Yes but a cheap way to get a custom battery and charger

Yes but my tired old brain thinks dia of 100-120mm but sellers quote flat various 170- 200mm but brain does not get it :eek: the case will not fit in the frame triangle :rolleyes: fs frame

Silly question what size heat shrink do i need to cover a hailong 2 battery need to repackage this [inside from a yose power 12.5 ah 48v ]

Try ftdi driver site this is a common problem

Not that i have seen, might be possible in the open source but suspect for safety it always is set to min assist my bafang is the same resets to level 1

The standard setting is reset to eco on power up

Me too:)