Search results

Hi shemozzle, bafang bbs hasn´t torque-sensor only max-drive is with torque-sensor Throttle connector depends on the controller, which version the retailer order at the factory, in germany usualy is no throttle connector because the user don´t like it but in Uk or US throttle is popular so I...

Hello I have a get a new toy I like to share, a bafang bbs coaster-brake motor I´m not a fan of coaster-brakes but apperently a lot of people waiting for a coaster-brake middrive conversion-kit as always on my website you can fínd more details for this motor, from outside it look like a...

as promised, so now I have the 190er Fatbike-hub motor of Bafang installed and tested. I have to say the motor is very good and has a high torque. This engine convinces me until now and without any ifs and buts. Frankly, I would always buy me compared to the mid-engine the hub motor, much...

Hi tezdread, on my Motorset you don´t need to make thread´s to the motor, I was considering this way how Doug made it but I come to the conclusion "to complicated". That´s the reason why I chose the way with welding, nobody need a expencive tool (thread-cutter) for only one time using. So I...

160front and 180rear? I assume that your measurement isn´t correct standard for fatbike is 150mm front and 190mm rear. Before the standard was 135mm front and 170mm rear. Bafang have two hub-motors for Fatbike one is for 170mm dropout and the other is for 190mm dropout´s 250watt -->500Watt you...

there are several different motor´s for fatbike´s For my self I´m hoping to receive my 190mm Fatbike-hub from Bafang within the next days and then I´ll post as always what I think about. Also wíll say some words about the hub-motor in compare with the bafang-bbs for fatbike

hi folks, some people in germany asked me whether it is possible to run a bionx-SL with a replacement controller like a cheap sensorless controller or even a sine-wave controller from china. Reason is the Bionx-SL is now mostly out of warranty and often brocken, specialy at the torque-sensor...

Hi Eddie, I guess we have that in common but I sell the bafang bbs 100mm bottom-bracket conversion kit and I thought it would be a good idea to know more about fatbike and not just sell the kit without knowing about ;) But I must admit that I had a lot of fun on riding across the forrest with...

you are right but I just want go on the road after install the motor and for my weigth of 130kg I thought put some psi extra to the tire but in between I let some pressure out of the tire because I took a ride in the forrest and my ass gave the signal of to high airpressure in the tire ;)

In fact the pedelec law come from japan and the european-union just copy most part of the japan rules. In the big city´s of china like shenzhen and guangzhou there is any pedelec forbidden because the government argue that to many crash´s by them and to much thief use the noiseless motors came...

Hello to the Fatbike Group, as probably some of you know I provide technical support for www.fatbike-motor.com in China but I have a distance to fatbike´s where I doubting the sense ...... but after a tour I have to say it's been fun and the views of the other´s are guaranteed ( I guess they...

hi justin, it would be better but brings the price 2usd higher and the china factory only focus on the price never on quality I had this discussion for many years and tried to explain they should make the price higher for a better quality......

I would change the motor-cable if you have some welding eperience you can handle it. I always use extension cord, cut the side with no need away and fix the cable to the motor. It´s no so difficult but need time and patience ;) I didnt wrote a manual for the mac-motor how to do, I only wrote...

the chainline issue with bbs01 was a problem on my bike too so I bought this 42th chainring and it makes a much better chainline as the original Bafang now I can use all gears and no problems anymore, it is good but not cheap...

I´m with d8veh and flecc that the sunstar has to low power. If I´d build that bike for my wife I would go for a Heinzmann, convert the drop-out for cassette Motor and ready is a powerfull cargobike with 250Watt. The Bafang 250Watt is in my eyes also to weak. with 500Watt bafang it´ll work but...

I´m not sure that I understood what you mean but the 30t sprocket I mentioned is a sprocket from the shimano ultegra front chaindrive so it should work. the chainline is a different issue but even there I guess it´ll work because it´s a long way to the rear dropout

I took a look on the original 46t Bafang sprocket and it is five arm, so it would not be necassary to buy the adapter you can cut the original sprocket and drill five whole´s into the rest and then you can fix the shimano 30t five arm sprocket to the original rest. I think this is good, cheap...

Hi flecc, sorry for my poor english and yes mfj197 is right, thats what I meant Another idea I describe with a photo, how about that solution by using one part of the bbs adapter to fix a 30tooth sprocket in the front? then it would be exactly the requested sproket

I don´t know the sturmey so well but with a adapter you can fit 32teeth to the bbs-motor with 104mm. Is it not good enough for your hub-gear? from my feeling it should work the cheapest adapter I found in australia: http://ballaratebikes.com/collections/all need some fine finish because it is...

Hi Andrew, I like that motor much more as the bafang but honestly, there is no longtime use experience because the Motor just a few weeks in the market regards frank