Search results

you are right.

Yes, I learned that! But can you be more explicit about that, please?

Hi! My question is : how would work my BBSHD with a 36V battery 11,5Ah?

HELLO! NEW PROBLEM!!!! I can't fix the stator (motor core) into its place. The rotor does not engage!

One more thank you! I did it! The choc-driver 90chf! But without difficulty the screws were out!

Yes, I understand, thanks. Sure, I does read that good. Thanks.

how does it work? what its name? thanks

Is it what's called in french "visseuse/perceuse à percussion"?

What do you mean, impact driver

Hi woosh! I have my engine in pieces now, it is impossible for me to unscrew the 3 fasteners of the nylon gear cover! I am furious, because all the other screws were very obedient! What I notice is a smell (maybe normal?) Which emerges from the stator kit and OPTIONALLY the copper wire has...

Thanks! I didn't see ANY error code, in any case or situation. But the engine doesn't work correctly. I lifted the rear wheel and started the engine with the accelerator on my finger, the changes of PAS happen correctly BUT with each PAS (1,2,3,4 -....) the engine suddenly marks a brief and...

Hi! How can I verify stator and controller (like image) with a multimeter? Is it possible to find for sure that they are working well? Thanks for your help!

Now I have greased this final drive but the noise is going on….Nylon gear needs a replacement….

I just look at this final drive and yes, grease has throwed off the cogs! I am in Switzerland and aeroshell or lucas tacky N, I will try to find that. Thanks. Maybe the noise will disappear after this maintenance but I am worried that the grease of the nylon gear too has disappeared...

Oh thanks a lot! And what grease do you recommend if you mind?

Fordulike, thank you!

Following a slope of 5% over a distance of 4 km the engine suffered from overheating to the point that I could not leave my hand on the box. After a stop of 15 minutes to let the ebike rest, I restart and then I hear that the engine produces a noise that I did not hear before. However everything...

Yes, it works and I am happy with it. Thanks.

Yes, you are right for that. But I do not panic because of these characteristics of the electric motor for which I am only learning but only because I did not find why my ebike undergoes a slowdown while I pedal normally. Well, now I have discovered the reason ... By chance ... By disconnecting...

And I would like to know if this is normal: I lift the rear wheel of the ebike, I put the PAS "1", I press the accelerator on the finger, the wheel reaches the maximum speed of the PAS "1", I let go the accelerator finger, the wheel continues to rotate at the same speed ... I must turn off the...