Search results

Hi d8veh, thanks for the quick reply only just got a bit of time of work to try the first option, unfortunately it didn't work. Not sure which are the self-learning wires If you could explain in a bit more detail please as I am a bit of a novice at electrickery. Regards Andy.

Hi, a friend of mine has a problem with his rear hub motor it would clunk but not turn.I plugged my bike electrics to his rear wheel to see if it would run but it wouldn't, when I plugged it back on to my bike electrics you can hear the motor running but the wheel isn't turning. Any ideas please...

I think I might have found the fault there is a brake in a thin wire where it comes out of the hub spindle. Thanks for your help Nealh. Will keep you posted when l find the time to rectify.

Hi , Nealh, will try and load a photo tomorrow. There is no pedal assist in the kit. On the wire loom there are all connectors male and female that match. The one that might be for pedal assist has what looks like a bridging blanking plug if this makes sense.

just fitted a cne-bike conversion kit with front wheel hub. The motor will only run if I spin the wheel backwards and push the thumb switch the ,motor runs for about 4 seconds and cuts out. Any ideas wha could be at fault.