Search results

  1. Andy1865

    S900 display

    Thank you for your reply
  2. Andy1865

    S900 display

    Hi all. My S900 display has a USB output, is it possible to wire 2 (12v-85v) lights to a USB cable and too have them work when i plug the USB cable into the display. I aint no whizz when it comes to wiring so rather not mess with any other wiring of the ebike. Sorry forgot to mention my battery...
  3. Andy1865

    S900 handlebar mounts

    Would rather not bother glueing again. Impossible to buy any here in the U.K so going down the 3D road.
  4. Andy1865

    Tyre pressure

    20psi or 1.4bar is the max on both tyres. I'm 16.5stone and tyres are 26" × 4" , so what is the best amount in both tyres for me weight please. I'd rather not go above the max pressure. Thanks Andy.
  5. Andy1865

    S900 handlebar mounts

    I had to take the mounts off, but when i put them back on they snapped under pressure
  6. Andy1865

    Tyre pressure

  7. Andy1865

    S900 handlebar mounts

    Hi all. Does anybody know anybody who can 3D print some S900 handlebar mounts. I have broken mine through over tightening. I have enclosed some photos of the offending article. Hope somebody can help and make some £'s. Thanks. Andy.
  8. Andy1865

    Tyre pressure

    Hi egroover what tyre pressure would you recommend for 26" x 4" (1.4bar and 20psi max input) for a 16.5 stone rider?. Thanks. Andy.
  9. Andy1865

    Unknown suspension seatpost

    It is Neal. Have Zoom been going along time?
  10. Andy1865

    Unknown suspension seatpost

    Hi All. I wonder if someone could help me i.d this suspension seatpost. Its 27.2mm dia and 310mm long. It has a carbon fibre weave outer skin with a bolt seat rail gripper. The only bit of writing has worn off, but the etching provides no clues. Thanks. Andy.
  11. Andy1865

    Suspension Seatpost

    Hi all. Does anybody have some recommendations for a suspension seatpost for a Fat tyre ebike. My Cane Creek Thudbuster is too tall for me to swing a leg over so now surplus to requirements unless somebody who know somebody wants to buy it, got other elastomers and a thudbuster glove with it...
  12. Andy1865

    Battery Charge

    Thank you sjpt.
  13. Andy1865

    Battery Charge

    Hi All, when it comes to charging a battery up, do i run it into the ground first then charge up from empty or charge up after every ride out. Which is the best method? Cheers for your input. Andy.
  14. Andy1865

    Replacement LCD(S900) on a FAT26

    Hi All, if anybody has a Ecotric FAT26 and has replaced their LCD(S900), could you enlighten me as to what they have. Thanks. Andy.
  15. Andy1865

    Ecotric controller

    Ok thanks Michael
  16. Andy1865

    Ecotric controller

    Learning wires???
  17. Andy1865

    Ecotric controller

    Hi All, i have already altered the mph on my Ecotric fat tyre and wonder if by pulling the two white wires apart it would derestrict further but all i get is a grinding sound from the motor, so clipped them back together and no sound. Can anybody tell me why it makes a grinding sound?. Thanks...
  18. Andy1865

    Battery question

    Hi all. Does anybody know if the controller will work if i add a 48v battery to my Ecotric26 instead of the 36v battery. The S900 display can be changed to 48v but i dont know enough about the controller. Will that need swopping and if so, what make and model would i need. The motor is 500w...
  19. Andy1865

    Hi everyone, herts newby

    It will change ya life for the better.