Search results

  1. B

    Still no response to my emails from BMS

    PayPal has given me a full refund as I don't think they had any more luck than me dealings with BMS battery , it is a good job I didn't drop the case with PayPal as they were insisting I did before the would send me another motor, I have know ordered a motor from the bike shed in Lincolnshire
  2. B

    Still no response to my emails from BMS

    Thank for the reply Harry I have been looking at other suppliers and have escalated the dispute as BMS where corresponding out side of paypall I have heard nothing more so it looks like it may be a some time before I re order another motor
  3. B

    Still no response to my emails from BMS

    thank you for the reply vfr400 we will talk to paypal as BMSB are insisting on use dropping the case before they will send a new motor. we did say we would post on the motor if they pay the postage.
  4. B

    Still no response to my emails from BMS

    thanks for the reply vfr400 i have put a dispute in and finally got a reply asking me to close down the dispute before they would send out a motor. They also asked if they had another buyer in the UK would i send the motor. I agreed to do that if they pay the postage, i have just had a...
  5. B

    Still no response to my emails from BMS

    I still have had no response from BMS about sending the 328 rpm Q100cst motor instead of the 201rpm that I ordered I take it this is there usual response when they get it wrong is to blank you, looks like I will have to look for an alternative motor from another supplier
  6. B

    Q100cst from BMS. I requested the 201rpm motor but they have sent the 328rmp motor

    thank you for the reply the two battery i have at the moment are 36v German made i had them made for my other two conversions,the 1st one was for a yose kit i put on a trek fx, the 2nd was for a tsdz2 motor, that i tried on the James but couldn't get the chain line right with the back...
  7. B

    Q100cst from BMS. I requested the 201rpm motor but they have sent the 328rmp motor

    I ordered a Q100cst from BMS. I requested the 201rpm motor but they have sent the 328rmp motor I am lacing it into a Mavic Open Elite Rim to use on a James quest road bike I have, the question I would like to ask is do I use the motor they have sent.
  8. B

    Yosepower hub kits.

    Hello Pc2017 it was me yose sent another controller and the throttle wasent working properly I have know put the 22amp one on C5 is set at 6 and it works good I am seeing 580W going up the hills now all I need know is the rain to stop
  9. B

    Yosepower hub kits.

    Hello I have been having fun in trying to get the hub to work since I last posted thanks for the setting information Nealth, my correspondence with YOSE have gone like this they asked for photos of the PAS on the bike then sent a new PAS which unfortunately didn’t solve the problem, they then...
  10. B

    Yosepower hub kits.

    PC2017 Thanks for the information it gives me plenty to think about but at the moment getting the one I am setting up is giving me enough problems the new pas sensor has not made the difference I hoped it would, the assistance setting wattage are staying at 0 ore 9 and I am having to use the...
  11. B

    Yosepower hub kits.

    PC2017 I noted your comment about the a 350w front hub being more fun, the idea of a front hub on my full suspension bike has got some appeal as I could strap the cables in a front bag on the bars and just have the throttle and buttons on the bars and the screen controller & cables in the bag...
  12. B

    Yosepower hub kits.

    PC2017 YOSE are sending a new pas sensor so i will wait to try that before cutting any plugs of, but i am going to order the controller and will go with your recommendation of the KT-D12L pas sensor as it is good for a hollowtech crank, i just haven't got round to it yet work and playing in...
  13. B

    Yosepower hub kits.

    This is the controller I am thinking of ordering I know it is 22amp but in another thread I read, it was Nealh I think he side you could reduce the amps from the lcd 3, this is the battery I went with (enerpower-hailong-pro-36v-frame-li-ion-battery-1750ah-diy-ga-charger-4a) as I wanted to try...
  14. B

    Yosepower hub kits.

    PC2017 Thanks for the offer but I think I will go with VFR400 suggestion and cut the plug off and solder the wires and use a bit of heat shrink round them. I have been in correspondence with YOSE they asked for a picture and have passed it on to their engineer’s we shall see what transpires. I...
  15. B

    Yosepower hub kits.

    Thanks for the input PC2017 you were spot on I have bent a pin on the connector one of the holes in the male plug looks to be obstructed and when I pushed the plug together I bent the pin, ore that’s my excuse anyway, it looks like I will be using the throttle for a bit. Also thanks vfr400 for...
  16. B

    Yosepower hub kits.

    This is the pas sensor supplied in the kit (Cable:52cm W/O connector Dual hall sensor,12 signals output)and is an integrated all in one item, I have taken the crank arm off to check that it is sitting right up to the crank and it is secure and when you turn the pedals the inner turns. I...