Search results

  1. G

    motor problem

    Can anyone recommend a motor extension cable please one that has hall sensors and phase wires for this wheel
  2. G

    motor problem

    would this do i also need the nine pin motor extention cable for it do you think the 60cm one will do...
  3. G

    motor problem

    hi neath hope your ok pal ive seen the exact one on ali express but its not available anymore this is it https://www.aliexpress.com/i/1005002211628435.html so im wondering if there is anyway of bi passing the lcd and main switch or would i be better of just getting a new one
  4. G

    motor problem

    Thank you all for your help the bike is up and running now. Onto next project I’m converting another fold up bike it’s got a 36v 350w motor and it came with this controller the wires I’m holding in pic are for the lcd which I havnt got is there anyway of bypassing the lcd also can anyone tell...
  5. G

    motor problem

    thank you i will try that and let you know the results
  6. G

    motor problem

    Also it is a nine pin connector that goes from the wheel connector and has three phase wires on and a sensor connector on so not sure how I’d do it
  7. G

    motor problem

    now i am def thick lol as i still dont know what to do with the blocks do you have a diagram or anything showing me what to do with it please. This controller i have has two green intelligent wires that when connected makes the wheel spin
  8. G

    motor problem

    That sounds well complicated don’t think il be able to do that so might have to end selling it could the halls be ok and one of the phaze wires need swapping about
  9. G

    motor problem

    Right guys im banboozled ive put new controller in new brakes and pedal assist the motor makes the noise as tho it’s working when you pedal and shuts off when the brakes are applied but the wheel dosnt engage and spin unless ur pedalling but it doesn’t speed up so I’m wondering if it could be...
  10. G

    motor problem

    there is a picture on here somewhere of them
  11. G

    motor problem

    hi pal it was the pedal assist that had gone the new one has come and just put it the crank to try it and the motor turns so its just the brakes i need to sort now on the controller side the wires are black and grey on the brake side they are blue and red do you know what colour would go to what...
  12. G

    motor problem

    thank you wheeliepete its just had new bearings put in but he said spindle could need replacing soon thats why i was thinking of changing to a sealed bottom bracket pal
  13. G

    motor problem

    thank you pal will look into it
  14. G

    motor problem

    hi neath i have a cyclematic power plus and im thinking of getting a sealed bottom bracket put in do you have any suggestions as to which sort would fit it pal please
  15. G

    motor problem

    thanks pal will order 5 magnet one then
  16. G

    motor problem

    looks like it is the pedal assist ive seen the same one on ebay for 20 quid but also seen a much cheaper one without the led but with only 5 magnets instead of 12 is there a great difference in the way they work or would the five magnate one work just as good im thinking of putting it on the non...
  17. G

    motor problem

    no pal the pedal assist does not activate when you reverse pedal will do the test tomorrow and let you know the results thank you for all your help so far
  18. G

    motor problem

    hi yea i do have a metre how do i do the test also how can the parammetres be changed the display isnt a digital one
  19. G

    motor problem

    thanks wheelie pete and neath thats working again now but still wont work on pedal assist even with the brakes disconnected