Search results

https://ebiketips.road.cc/content/news/tube-unions-want-tfl-to-ban-e-bikes-from-the-london-underground-following-latest-fire

https://ebiketips.road.cc/content/news/tube-unions-want-tfl-to-ban-e-bikes-from-the-london-underground-following-latest-fire

I know this will never happen. I was wondering if bikes should come with replacement dropouts on both sides so you could swap between an ebike motor and a standard wheel. You could have the bike come with standard dropouts and retro fit ebike standard dropouts. SRAM has made a Universal...

The below have a bit more thread Marathon plus tour Marathon 365 You could also try Continental Contact Plus

I would buy a connex chain if using a mid drive, you don't need any tools to take off and put back on. You still need a chain tool to get the correct length, makes cleaning the chain slightly easier, I oil my chain at the same time as well.

The DJI is an interesting motor, it is entering a very competitive market I think the BBS02 has readily available spares,readily programmed and competitively priced in its favour One of the advantages of throttles is that you can exit traffic lights at a good speed which helps the flow of traffic

Could you mount a shifter on a shifter on a bar end Bar end, others are available. https://www.amazon.co.uk/BBB-Barends-Classic-Bbe-07-Colour/dp/B000VT0DWK?source=ps-sl-shoppingads-lpcontext&ref_=fplfs&psc=1&smid=A3P5ROKL5A1OLE&gQT=1

https://rolwheels.com/pages/freehub-cassette-compability#:~:text=SRAM%20has%208%2D11%20speed,with%20Shimano%20it's%201mm%20narrower.

It might be the shifter internals need cleaning and oiling. Shimano recommend DriSlide Bike Aid lube (it's expensive), a light oil such as Triflow (GT85, Finish Line Dry Teflon Lube is the equivalent) for lubricating gear shifter internals, wet lube are too sticky and can attract dirt I...

It sounds like you have a shifter like the one below and sits on top of the bar...

You can buy adapters like the one below, I have never used one so cannot say if they are any good or not...

Do you need the type of shifter in the photos?

I have found that I had to file the sides and the bottom of the dropout, this required a second cut flat file and a 10mm round file Grin technologies make the all motor which you can use without any modification. If you don't file the bottom the height of the motor axle and anti rotation tab...

I am wondering if anybody can recommend an alternative to Lekkie chainrings. They are good but expensive, there seem to be numerous on alternatives on AliExpress and Amazon. Thanks for reading.

I am recommending due to Woosh customer service and then being able to answer any questions people have on the forum.