Search results

Great, thanks, will have a search tonight!

So having thought about this over lunchtime, does anyone have a suggestion of, controller, display and pas sensor that will work together and have the ability to be adjusted? It's a 9 pin connector to the wheel. Cyclotricity have gone into liquidation so I'm not going to be able to replace parts...

Thanks again all, great advice, will double check everything later on!

Oh I forgot, the original Pas was the two semi circle, push together type with a big C clip holding the halves together, the pickup has a little bracket cable tied to the bottom of the seat tube part of the frame, the gaps were good, I took it all off cleaned it, checked the gap was close and...

I can get into the P1 to 5 settings with a bit of press and holding buttons but to be totally honest I've no idea what they mean or do beyond looking at them. Pretty sure the Mrs won't be overly happy if I burn the house down adjusting stuff either!

Nothing unusual happened, I noticed it wasn't cutting in and out on a ride as usual, most of the time it was fine again if I sped up a teeny bit and I was thinking I might have had some dirt on the magnets or something and I'll sort it out when I got home, but then after a quick stop to have a...

LCD screen Thanks for the reply too!

This is the controller..

So after a huge 275 miles my cyclotricity kit has stopped working on PAS, the throttle works normally with no power loss at all, and cyclotricity have just called in the receivers, awesome. So anyway looks like it's down to me to fix it, the little red LED flashes when turning the cranks, but...

Evening everyone, I'm new to the forum and ebikes in general really. I bought a cyclotricity 250w front wheel kit early this year and after a few customer service issues I eventually got all the parts together and built it up. Enjoyed it so far as a first ebike, enough to buy a Swytch kit for...